Electronics Forum | Fri Jul 20 13:57:25 EDT 2007 | fastek
Invest in some training.
Electronics Forum | Wed Oct 16 01:02:27 EDT 2024 | lukejk95
Hello, We have a Radial 5 machine from Universal Instruments and every time I turn the Interlock Bypass key to disengage the Interlock Bypass and run at full auto, my machine will act as if a cover or an interlock is not being made. All 13 covers ar
Electronics Forum | Thu Jul 19 14:03:53 EDT 2007 | slthomas
Radial Leads (I've had IIs, IIIs, and Vs) do the job nicely, but they need weekly maintenance to keep them running. I don't know if you can get parts for them or not if you're not registered with UIC, but you WILL need parts for it. You will need al
Electronics Forum | Wed Jun 30 15:02:17 EDT 2004 | shk5678
Dear Michael Usually the equipment you need is: Universal Instruments 6772 Multi Mod IC Inserter. Universal Axial Inserter either a combination unit or 2 stand alone units one that sequences the parts and one that inserts them. Universal Instrume
Electronics Forum | Wed Oct 16 15:43:37 EDT 2024 | rup
Some of those older machines have a fuse behind the e-stop button.
Electronics Forum | Thu Oct 17 13:31:03 EDT 2024 | poly
Voyager and the uic site has diagrams for the safety systems. There's often interlocks on weird stuff, like for me it was a feeder bank sensor was loose.
Electronics Forum | Thu Jul 19 11:15:29 EDT 2007 | gmoritz
We just obtained a Radial 5 Inserter with no documentation on how to run the software or to operate the machine. All I have is some hastily handwritten notes from the limited instructions that the installer gave me. Does anyone know anyone who has
Electronics Forum | Thu Jul 19 11:39:46 EDT 2007 | jdengler
Did you buy this from an equipment dealer or an end user? If you bought it from an equipment dealer and they said manuals included I would call them daily with questions that a manual would probably provide until they give up and send you manuals.
Electronics Forum | Tue Jul 24 11:28:35 EDT 2007 | vikkaraja
I have to agree with Fastek on the issue of having someone with enough experience or with proper training. Having knowledge and being flexible about tweaking the machine to make it work thats all you really need. We used to call it black magic. I use
Electronics Forum | Fri Jul 27 15:08:07 EDT 2007 | jeffharley
If you have'nt had the pleasure of working on these machines, plan on spending a few weeks in Binghamton to get the basics, this will just get you started. I've worked on these machines for more than 20 years and am presently training two of my guys
