Electronics Forum | Thu Apr 18 09:20:58 EDT 2002 | huey
Having been the G.M. of Universal's remanufacturing division for 10 years I am familiar with the "Third Party Support Policy" as I was the primary author of it. The primary reason the policy was developed was to make it more difficult for other rese
Electronics Forum | Wed Jan 09 17:42:08 EST 2019 | sarason
3 tools a straight edge that can run between 2 machines and a level. You could also use an auto level as they do make life easy. With either setup your line should end up less than 1mm t of true over a20 metre distance. sarason
Electronics Forum | Mon Aug 17 15:59:48 EDT 2020 | cyber_wolf
Calibration was done improperly or you have a bent mount tool.
Electronics Forum | Mon Aug 17 17:01:31 EDT 2020 | rgduval
+1 to what Sr. Tech said. I'd also add that you could have some uneven deterioration of the centering jaws. Check by doing a couple of things (this will help check if the tool/tip is bent/deteriorated as well): 1. Turn off mechanical centering, and
Electronics Forum | Fri Sep 10 09:03:52 EDT 1999 | ScottM
| | hi, i m college student. i m currently doing my Final year project in PCB drilling. the main task is to design auto feeder which allign the PCB properly in position before drilling take place. the close tolerance becomes a big problem to the prec
Electronics Forum | Fri Sep 10 12:09:02 EDT 1999 | Earl Moon
| | | hi, i m college student. i m currently doing my Final year project in PCB drilling. the main task is to design auto feeder which allign the PCB properly in position before drilling take place. the close tolerance becomes a big problem to the pr
Electronics Forum | Sun Sep 12 08:20:04 EDT 1999 | se
| | | | hi, i m college student. i m currently doing my Final year project in PCB drilling. the main task is to design auto feeder which allign the PCB properly in position before drilling take place. the close tolerance becomes a big problem to the
Electronics Forum | Thu Sep 09 09:13:10 EDT 1999 | Scott Cook
| hi, i m college student. i m currently doing my Final year project in PCB drilling. the main task is to design auto feeder which allign the PCB properly in position before drilling take place. the close tolerance becomes a big problem to the precis
Electronics Forum | Thu Aug 27 13:56:27 EDT 1998 | Stefan Witte
| Where can I find a good tool to splice 8mm and 12mm paper and plastic part carrier tapes together? Siemens has a pretty good splice tool, which crimps a small brass strip into the tape. The cover tape has to be sticked together with a small strip o
Electronics Forum | Sun Dec 12 08:39:32 EST 2004 | davef
The reliability of the measurements provided by your instrument is indicated by consistency. This is a process control tool. it does not provide absolute measurements. It does is not tie to the NBS, er whatever they use in the land of the frozen t
winsouce.jpg)
.png)
