Electronics Forum | Fri Sep 13 10:56:05 EDT 2002 | slthomas
For starters, can you verify that the seal integrity is still intact?
Electronics Forum | Fri Nov 07 16:00:45 EST 2003 | Don A
It would depend on how many boards and parts you need to build. I would prefer an etch cut as it leaves the the part intact and you get the strength of the solder joint. It also reduces the handling of the BGA and associated damage from that
Electronics Forum | Mon Nov 01 17:27:07 EST 2004 | Dreamsniper
Hi davef, Will the ion chromatography be able to quantify then identify where and what the contaminant is? Is this a destructive type of testing or the PCB will remain intact right after the test? thanks for the inputs. dreamy
Electronics Forum | Tue Aug 02 15:13:09 EDT 2005 | Sandy B
I am looking for a method (Automated preferably) to clean any residue and or debris from a BGA after rework. Is it possible to clean them using an inline wash process, as long as the devices are intact and held correctly. What woudl be the correct m
Electronics Forum | Tue Sep 26 15:09:17 EDT 2006 | slthomas
I hope that you don't miss that data later on. My suggestion of changing align type to "2" (in the extent data) eliminates the alignment step but leaves the data intact.
Electronics Forum | Mon Aug 16 12:27:44 EDT 2010 | mikesewell
Don't have one but have you tried starting with a fresh install of the software, you may want to swap PCs or hardrives to keep your existing setup intact.
Electronics Forum | Mon Oct 14 15:13:52 EDT 2013 | esoderberg
Does anyone have a novel idea on how to protect the flex area during conformal spray coating? Currently using Humiseal T30 on the flex but it has to be removed very carefully to insure coating stays intact on the board.
Electronics Forum | Mon Jan 06 14:02:00 EST 2020 | dman97
Have you tried to open the MINT program and re download the drivers to the cards? Sometimes the cards fail because the battery does not hold sufficient charge to keep the files intact.
Electronics Forum | Tue Oct 11 20:06:16 EDT 2022 | emeto
In both cases you will be close to the eutectic composition(61.9%Sn), so I expect joint to be intact and uniform.
Electronics Forum | Tue Dec 19 19:11:37 EST 2000 | Michael Parker
Not much activity here in the past few days. Just wondering if you all have been egg nogging it too much in preparation for jolly ol' St. Nick. Or could it be that some have taken to smoking the mistletoe? I hope DaveF. has recovered OK from his re
.gif)
