Electronics Forum | Tue Jun 28 04:40:14 EDT 2005 | thaqalain
Motherboard:Intel: D845GLLY requiring PC133,128MB I done all 3 possible cases: I-Inserted AZEN RAM PC100,128 MB in Slot#1 with Kingston PC133,128MB in Slot#0,it read 126 MB. II-Inserted PC100 only in Slot#0,it read only 64 MB and Ssystem was exces
Electronics Forum | Tue Sep 30 17:56:38 EDT 2008 | davef
Some of the popular handheld digital microscope seem to be aimed at home science projects. Units that are priced similar to the Bodelin Technologies ProScope are: * Celestron 44300 Handheld Digital Microscope * Orion Microxplore PC200 Digital Handhe
Electronics Forum | Thu Jun 24 22:22:06 EDT 1999 | Dave F
Problems with downloading papers from the library not withstanding, downloading other papers in the library is problematic, as follows: Understanding SP440 Heating & Vacuum Functions Credit/ Source: LEO HUERTA, TECHNICAL SERVICES ENGINEER Works fi
Electronics Forum | Tue Apr 24 11:28:34 EDT 2001 | Barry
Anyone have any specific knowledge of SMTECH 100 i S machines and the pro's and con's. Does the machine capability rank as good bad or indifferent within the industry?
Electronics Forum | Sat Sep 29 10:10:05 EDT 2001 | foxy
I used to build the SMTech 100 range of machines before the company closed, and i also have dealings with them still. The 100is is a very capable machine and will go on forever with a little T.L.C. foxy
Electronics Forum | Fri Jul 22 13:17:49 EDT 2011 | ehughes
I would be careful with trying Rain-X. Rain-X is a silanol treatment that is not durable. That is why you need to reapply it on a windshield many times. Also you could contaminate the paste as it will come off the stencil during the printing. From
Electronics Forum | Wed Oct 10 16:50:44 EDT 2001 | jeff
The "UP100 " is currently built by Speedline. However only the models UP100S (No Vision and manual adjust table ) and the UP 100MV (Vision and manual adjust table). These are batch printers not in-line. The IS model has been out of production for ab
Electronics Forum | Thu Sep 20 03:31:42 EDT 2018 | minhhaioh34
Hi all, I need some pro help me with issue bubbles after coating. some information for some pro: Machine: Asymtek Chemical: Achime AVR80 Oven: IA 4 zoon4 ( setting 100 100 90 80 conveyor speed: 0.6 m/min). I had happened before and after the oven. W
Electronics Forum | Fri Oct 05 08:35:29 EDT 2001 | PeteC
I believe this machine is now the MPM UP 100 and is supported thru Speedline Technologies-MPM and is now mfg.'d in Franklin Mass.
Electronics Forum | Mon Jan 13 18:22:55 EST 2003 | davef
100 sec) and decrease reflow temp to 205C. * Understand that voids are primarily process indicators. There is experimental evidence that voids retard crack propagation locally around the void on a temporary basis. There is no standard, IPC or otherw
winsouce.jpg)
