Electronics Forum | Thu Oct 26 07:18:47 EDT 2017 | stephendo
Once upon a time an IP3 and CP6 would shut themselves off when the room was too hot. But IIRC they simply shut down until they cooled off.
Electronics Forum | Wed Oct 25 11:25:12 EDT 2017 | paddyronan
Hi all, I have a recent issue with an IP3 machine. The machine cycles through normal power up routine. Then the video monitor and VME card shit themselves down and after a couple of minutes the CPU board powers down. However this is intermittent. Wh
Electronics Forum | Sun Jan 29 02:33:36 EST 2006 | daxman
Hello all, I work with a company which runs a fairly small SMT department. For now, we have a "main" line consisting of a Fuji CP6-45, and a Fuji IP3, and a proto line which uses a Fuji CP4. We also use Fuji Flexa programming software. The issues
Electronics Forum | Wed Apr 24 11:02:01 EDT 2002 | cnoonan
This may not be the answer you were looking for, but I have worked for serveral leading technology companies and we used vision (type 10)on IP3, and QP3 machine and never had a problem with placement issues.
Electronics Forum | Wed Mar 20 13:49:15 EST 2002 | cabjerk
Hi All; The following is from our Support people who worked with Fuji on the problem; Last week Luke Mittur and John Gudel were in from Fuji to address the IP3 issue outlined below. The problem ended up being that the table "up" and table "dow
Electronics Forum | Tue Oct 16 01:29:11 EDT 2012 | dman97
I have a very odd problem with my Fuji IP3 and was wondering if anyone can help. Any part that gets picked from the MTU will fail vision recognition. After turning on the vision trace data, I can see that the IP3 is looking for the part to be rotat
Electronics Forum | Mon May 25 20:31:32 EDT 2009 | dcell_1t
wich is the model of the machine you're trying to place this component? what are the placement issues that youre observing. on the IP3 that we place switches we use a 3.7 nozzle (standard) because of the dimensions on the component, the issue that I
Electronics Forum | Thu Apr 28 11:13:33 EDT 2005 | cyber_wolf
We currently have Fuji's(IP3's included) and Mydata's in our SMT area , so training is not an issue. The reason I was thinking of an IP3 is because they seem to be available for 50K or so. We cannot afford to loose any mag positions on our Mydata's t
Electronics Forum | Tue Sep 14 17:08:58 EDT 2010 | daxman
Hi, Do you have an Xray machine? we've had similar problems with micros in the past. I'd place one on double sided tape and x-ray to ensure that it is centered. If it is, i'd look into other issues such as vibration or speed of the PCB in the machin
Electronics Forum | Thu May 31 19:45:47 EDT 2007 | diesel_1t
We place a QFP 256 leads 20 mil pitch, had a lot of troubles with shifted components and solderability issues. solderability is not a problem anymore; we solved with a ramp-to-spike profile with .9�C/s 'til 183� then spike to about 118�C, TAL ~60s. W
