Electronics Forum | Tue Feb 20 06:31:58 EST 2007 | mika
It depends on what VME box build it is. Rev. C, D, E etc. There are upgrade kits for the complete VME chassi and it includes some re-wiring also. For this You must contact UIC and provide them with the machine ser.nr, current Os-system, UPS s/w ver.
Electronics Forum | Mon Jul 28 18:31:43 EDT 2003 | mantis
Hi There, First has the machine in question had the camera upgraded to accomdate 0603/0402. It sounds like there is a bad pickup on this part.Are all nozzles ok is feeder indexing correctly has part pick up position(Station 1) been calibrated. Hope t
Electronics Forum | Mon May 14 03:21:20 EDT 2001 | Eyal Duzy
Phil, In the considerations you make for choosing an AOI tool, you should check what a vendor delivers today and what will it be able to deliver in the future. As the role of AOI in the SMT production line evolves from "detection" to "prevention"
Electronics Forum | Tue Feb 16 14:40:54 EST 1999 | john hearty
Has anyone changed out the old 4400 vision processor on a Fuji IP3 and replaced it with a newer 4800 vision processor. What does it take to do this and what does it consist of doing. What do I need to order from Fuji in order to do this.
Electronics Forum | Tue Mar 17 11:13:26 EDT 2009 | tegel
Hi, Now it was a couple of years since I did this but it's possible. I have been down to 0.5 mm pitch. If you have a vision system with vision type 230 I would suggest that you use that. One other trick is to only specify 50 % of the ball diameter.
Electronics Forum | Thu Jun 23 03:43:45 EDT 2005 | ajaydoshi
Hi Jerry, > > Thanks for the info. Is vision > number required for the IP3? From the manual it > appears not (needed for IP1 & 2), however vision > type is required. > > Thanks, Dave We are using IP3 & placing BGA. BGA part data only for outer
Electronics Forum | Wed Jun 22 18:35:45 EDT 2005 | Dave
Hi Jerry, Thanks for the info. Is vision number required for the IP3? From the manual it appears not (needed for IP1 & 2), however vision type is required. Thanks, Dave
Electronics Forum | Thu May 18 23:22:44 EDT 2000 | Micah Newcomb
Jerry, Contact FujiAmerica and ask for their newest product Guide. Some differences are..... IP2 - SMD1 vision (back lighting only, coplanarity check optional) IP3 - SMD3 vision (back, front, coplanarity check optional) IP3 - BGA transport, I
Electronics Forum | Tue Oct 16 01:29:11 EDT 2012 | dman97
I have a very odd problem with my Fuji IP3 and was wondering if anyone can help. Any part that gets picked from the MTU will fail vision recognition. After turning on the vision trace data, I can see that the IP3 is looking for the part to be rotat
Electronics Forum | Mon Apr 22 22:14:54 EDT 2002 | Gang shen
the case is that FUJI IP3 failed to place BGA ,when it is processing the BGA vision ,often occours the alert message. Our oprating system is MCS30,the software version is v1.3. anyone encounter the same problem? it is be appciatiate that feedback any
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723