Electronics Forum | Wed Feb 12 16:48:31 EST 2014 | gmcquoid
We are having an internal debate here related to minimum Conductor Width. Can you have your QA manager review this and advise. IPC-6012C-2010 3.5.1 Conductor Width and Thickness When not specified on the master drawing the minimum conductor width s
Electronics Forum | Thu Aug 09 07:53:16 EDT 2012 | davef
Allowable bow & twist: Together, both IPC-A-600G and IPC-6012B represent the core IPC documents for describing the acceptable and nonconforming conditions that are either externally or internally visible on finished printed boards. IPC-A-600G relies
Electronics Forum | Fri Aug 15 00:51:30 EDT 2008 | boardhouse
Hi Paul, My discloser, I sell for an offshore house, this is Crap.... Section 3.4.3 Annular Ring (External) of IPC-6012A, which also calls out Table 3-5, states that "Plated-through holes identified as vias can have up to 90 degrees breakout of t
Electronics Forum | Wed Jan 03 17:37:16 EST 2024 | davef
IPC Releases IPC-6012F, Qualification and Performance Specification for Rigid Printed Boards Changes address advances in rigid printed board fabrication processes Oct 18, 2023 [https://www.ipc.org/news-release/ipc-releases-ipc-6012f-qualification-and
Electronics Forum | Tue Jan 02 07:31:17 EST 2024 | cdming
IPC-6012F 2023 EN,Qualification and Performance Specification for Rigid Printed Boards
Electronics Forum | Wed Nov 10 17:52:28 EST 2004 | Dave
You can start with J-STD-001 for assemblies or IPC-6012 for Bare Boards.
Electronics Forum | Fri Sep 09 11:57:59 EDT 2005 | davef
Look for discussion of breakout in: * A-600 * A-610 * 6012
Electronics Forum | Wed Oct 29 20:28:59 EST 2003 | davef
The possibilities are dizzying, aren't they? In our dingy fog, if we don't understand your requirement, say so. 3 Spec Fir Tree General Technical Specification 3a Design/Layout: IPC-2221 IPC-2222 3b PCB Fab: IPC-6011 IPC-6012 IP
Electronics Forum | Thu May 31 10:40:30 EDT 2001 | davef
See, all those bad thoughts we had ... The guilt, how do we live with it? 3 Spec Fir Tree General Technical Specification 3a Design/Layout: IPC-2221 IPC-2222 3b PCB Fab: IPC-6011 IPC-6012 IPC-4101 IPC-A-600 3c PCB assembly: J-STD-001 IPC-A-6
Electronics Forum | Thu Jan 12 22:29:10 EST 2023 | rgduval
So, as I understand it, IPC6012 are performance criteria that your board shop should be using. I think you'd want to be using IPC600 for acceptance criteria at incoming inspection. At least, that's what I always did in my CM days. And, since you'r
IPC is the trade association for the printed wiring board and electronics assembly industries.
Training Provider / Events Organizer / Association / Non-Profit
3000 Lakeside Drive, 309 S
Bannockburn, IL USA
Phone: 847-615-7100
