Electronics Forum | Fri Mar 05 08:51:06 EST 2010 | pjc
Just got this off the wire, new IPC A610E Document -due out in April: http://www.solder.net/marketplace/product_desc.asp?Sku=IPC-A-610E&Category=61
Electronics Forum | Mon Dec 22 16:20:03 EST 2014 | warwolf
Basically the contract comes first, then the design drawings then IPC. if your costumer is asking you to bend the PCB then it becomes apart of the design drawings. as for looking for a cover, get it in writing that that's what they want you to do. I
Electronics Forum | Mon Jul 24 07:18:51 EDT 2017 | jamesbarnhart
IPC has updated assembly standards for IPC A-610 and IPC JSTD-001 making them easier to use and adding information in areas that have evolved. Both IPC J-STD-001E and IPC-A-610E have also been more closely linked to eliminating the differences that c
Electronics Forum | Fri Sep 23 10:34:41 EDT 2011 | blnorman
IPC-A-610E "Acceptability of Electronic Assemblies" addresses this specific issue as well as most others. This issue would be to what class (1, 2, or 3) your assemblies would be governed by.
Electronics Forum | Fri Sep 23 10:40:49 EDT 2011 | minda
I found IPC-A-610E, but I cannot find one online that I can view without purchasing. We do not want to pay for a standard we are not sure we will be able to use.
Electronics Forum | Fri Sep 23 12:24:57 EDT 2011 | minda
I found some useful information in a red line version of IPC-A-610E I uncovered with a quick google search, and I will see what I can find out about their standard of acceptability.
Electronics Forum | Thu Mar 29 08:28:28 EDT 2012 | williamaxler
In the IPC-A-610E standard QFNs are classified as BTC (bottom termination components). Most QFNs do not have a solder-able surface on the outside of the part. Usually the lead that you can see on the outside is copper and classified is not solder-a
Electronics Forum | Tue Jul 18 09:05:54 EDT 2017 | davef
Acceptability of Electronic Assemblies IPC-A-610 F Comparison E to F versions * http://www.electronicsyorkshire.org.uk/UserFiles/PDFs/610E%20to%20F%20Redline%20comparison.pdf * https://www.youtube.com/watch?v=kD5NpsocTpw * http://www.scanditron.c
Electronics Forum | Wed Aug 21 09:09:50 EDT 2013 | wcheew
I am having solder barrel fill issues on THM component, we follow, we follow IPC 610 E requirement. The barrel fill issues happen on signal & ground pin at connector & E-cap. I found out that most of the insufficient solder happen on the connector ag
Electronics Forum | Thu Jan 31 10:20:04 EST 2013 | rjohnston58
Need your help with a referee call on solder balls. See attached pictures. Engineering believes the solder balls and splash in pictures violate IPC-A-610E-2010 section 5.2.7.1. Purchasing on the other hand believes these are acceptable. Info: balls a
IPC is the trade association for the printed wiring board and electronics assembly industries.
Training Provider / Events Organizer / Association / Non-Profit
3000 Lakeside Drive, 309 S
Bannockburn, IL USA
Phone: 847-615-7100
