935 ipc workmanship standards results

Electronics Forum: ipc workmanship standards (Page 1 of 94)

SMT reliability vs workmanship standards

Electronics Forum | Fri Feb 13 15:16:43 EST 1998 | Robert J. Clarke

Looking for studies that relate smt reliability against workmanship standards. For example does J-STD 001 level 3 indicate a high rel level than level 1. Thanks

Can I apply IPC-610 class 3 workmanship standards to an assembly made with a IPC-600 class 2 PCB?

Electronics Forum | Thu Feb 05 14:30:29 EST 2015 | chsravan

Can I apply IPC-610 class 3 workmanship standards to an assembly made with a IPC-600 class 2 PCB?

Electronics Forum | Fri Feb 06 18:32:59 EST 2015 | chsravan

Hi Scott,Thank you for the response. I was also thinking the same that the assembly will no longer be Class III. Thanks again.

Can I apply IPC-610 class 3 workmanship standards to an assembly made with a IPC-600 class 2 PCB?

Electronics Forum | Fri Feb 06 11:11:04 EST 2015 | mascott123

I have asked that same question to a co-chair of the J-STD-001 committee who in turn checked with personnel at IPC. The answer I received is that yes you can apply the Class 3 assembly requirements using a class 2 PWB but the resultant assembly will

Re: SMT standards

Electronics Forum | Wed Jan 27 21:14:39 EST 1999 | Dave F

| Some of you can please tell where do I can find information about standards used for SMT devices? | | Thanks | Enrique: Scott is correct that the IPC is an out-standing source of standards information. Other respected standard setting groups ar

What standards should electronic manufacturing meet?

Electronics Forum | Fri Mar 19 13:42:05 EST 2004 | blu_nozer

J-STD-001 is the workmanship standard. IPC-A-610 is a guide to evaluating conformance to the standard & includes photographs of compliant and non-compliant examples. In addition there is also IPC-HDBK-001 which expands on the bare requirements laid d

Inspect workmanship through conformal coating

Electronics Forum | Sun Sep 04 13:16:44 EDT 2016 | danhhunter

Is it possible and does any standard cover inspecting soldering joints through conformal coating?

Inspect workmanship through conformal coating

Electronics Forum | Tue Sep 06 12:41:52 EDT 2016 | kmclain

IPC J-STD-001 does not allow solder inspection to be combined with coating inspection for classes 2 and 3.

Inspect workmanship through conformal coating

Electronics Forum | Mon Sep 05 16:24:09 EDT 2016 | davef

inspect => conformal coat ... and standards are aligned with that philosophy. I can imagine doing a good job inspecting assembly after being coated with particular coating thickness, optical properties, lighting conditions. Ultra-thins are so thin