Electronics Forum | Tue Sep 24 13:03:51 EDT 2019 | davef
IPC-J-STD-003C: Solderability Tests for Printed Boards [ https://shop.ipc.org/IPC-J-STD-003C-WAM1-2-English-D ]
Electronics Forum | Fri Feb 15 18:51:13 EST 2013 | hegemon
My hat in the ring too, but with ALL pads showing 95% coverage or better. Slightly different interpretation! 'hege
Electronics Forum | Thu Nov 12 11:21:42 EST 2015 | davef
IPC J-STD-003. Solderability Tests for Printed Boards
Electronics Forum | Thu Feb 11 20:38:47 EST 2016 | davef
Try: * J-STD-003 “Solderability Tests for Printed Boards” * IPC-4555 OSP Finish Specification
Electronics Forum | Fri Feb 15 14:38:59 EST 2013 | bmario
Hi, We are having a problem with the interpretation of the surface evaluation criteria of J-STD-003 section 4.2.2.4.2. "A minimum of 95% of each of the surfaces (i.e. each pad) being tested shall exhibit good wetting. The balance of the surface may
Electronics Forum | Thu Jun 16 22:07:16 EDT 2005 | davef
Chris As you imply, testing board and component solderability prior to assembly is preferred. * ANSI/J-STD-002 - Solderability Tests for Component Leads, Terminations, Lugs, Terminals, and Wires * ANSI/J-STD-003 - Solderability Tests for Printed Boa
Electronics Forum | Tue Jun 06 09:33:11 EDT 2000 | khalid
Please refer to the following document for your information. IPC/JEDEC J-STD-003. This document can be downloaded from WWW.IPC.ORG. Feel free to contact me if you have any question. Khalid.Saeed@marconi.com Regards Khalid
Electronics Forum | Tue Apr 24 12:44:11 EDT 2001 | Steve
Take a look at J-STD-003, Solderability Tests for Printed Boards. This may help you create a procedure.
Electronics Forum | Mon Jan 23 20:58:08 EST 2006 | davef
J-STD-003B - Solderability Tests for Printed Boards is currently a "Working Draft". Look here: http://www.ipc.org/status.asp
Electronics Forum | Mon Mar 05 22:42:30 EST 2007 | davef
On your ENIG thickness requirements, search the fine SMTnet Archives for previous discussions, like: http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=33661 On determining if your board will solder properly: ANSI/J-STD-003, Solderability Te
