Electronics Forum: j-std 001g cleanliness (Page 1 of 4)

Manufacturing and test room cleanliness

Electronics Forum | Tue Jan 23 10:15:44 EST 2007 | slthomas

J-STD-001C just requires that the area not be so dirty as to contaminate your product, tools, workspace, etc. If you start counting particles, you're into cleanroom territory. Do a search on ISO 14644-1 for specifics. Actually Wikipedia does a ni

IPC-A-610 and IPC J-STD-001 Updations

Electronics Forum | Mon Jul 24 09:15:32 EDT 2017 | davef

James: This is not "breaking news." IPC-A-610F, Acceptability of Electronic Assemblies was released in July 2014. Both, ... * IPC-A-610G, Acceptability of Electronic Assemblies * J-STD-001G, Requirements for Soldered Electrical and Electronic Assem

Requirements for a room with SMT equipment

Electronics Forum | Wed Sep 20 16:15:53 EDT 2017 | davef

Some requirements to consider are: * Humidity and temperature controlled according to J-STD-001 * Electro-static discharge (ESD) control program according to ANSI/ESD-S-20.20. * Soldering technicians are trained and certified according to J-STD-0

Ceramic Chip Cap Processing

Electronics Forum | Tue Nov 18 18:25:57 EST 2003 | Gabriele

To process Multy Layer Ceramic Chip Capacitor is a critical process some time underevaluated mainly at rework or repair step. You can find useful guidelines on J-STD-001 G

IPC J-STD-001E Ionic Cleanliness Standard

Electronics Forum | Fri Aug 30 22:51:14 EDT 2013 | cvogel

IPC-J-STD-001E in regards to Ionic Cleanliness standards states less than 1.56 µg/cm² of total NaCL. Assuming a typical electronic process which involves smt, wave, and post-hand soldering and uses NO-Clean flux throughout all process, is it typi

Need help on PCBA Cleanliness Standards and Specs

Electronics Forum | Tue Nov 25 17:43:09 EST 2003 | Gabriele

Try to see J-STD-001 Chapter 8.Cleaniness Requirements. Also you could info also on ASTM D5127-99. Rgds

Key Points to be considered while buying Ionic Contamination Tester

Electronics Forum | Mon Nov 02 22:04:30 EST 2015 | davef

An ionic contamination tester should meet industrial cleanliness specifications including MIL-STD-2000A, MIL-P-28809, J-STD-001 and Resistivity of Solvent Extract (ROSE) Test Method IPC-TM-650 2.3.25

Solder Station Logs

Electronics Forum | Mon Feb 25 09:53:30 EST 2019 | tombstonesmt

Good morning! In order to comply with current IPC J-STD-001G Appendix A-2, I'm putting together a log to periodically monitor solder tip temp tolerance, tip resistance, voltage leakage, etc.. I'm solely focusing on the hand solder stations for the t

omega meter

Electronics Forum | Wed Mar 06 21:16:17 EST 2002 | davef

�What does 5 micrograms of chloride mean to me?� * With SIR testing, you can show no detrimental leakage currents under humid conditions, no corrosion, no metal migration, which are the big factors in figuring out electrochemical reliability. People

Calculating PCB surface area

Electronics Forum | Tue May 14 20:43:55 EDT 2002 | davef

I feel as though I�ve just walked in to a bar, where everyone I was supposed to meet has been drinking for 3 hours. First, the volume of water displacement thing doesn�t make sense, as others have commented. Second, I believe Dave Robbie wants meas

  1 2 3 4 Next

j-std 001g cleanliness searches for Companies, Equipment, Machines, Suppliers & Information