Electronics Forum | Mon Apr 21 10:59:39 EDT 2008 | davef
That you have 'grainy' solder only at the ends of the connector and not at all solder connections indicates that your quality types are on track and are pointing you in a direction worthy of investigation and developing a better understanding of the
Electronics Forum | Tue Apr 12 08:25:43 EDT 2005 | davef
Q1 Can anyone explain to me what is the clean and non clean solder? A1 The trend away from CFCs has lead many users to evaluate switching to no-clean soldering processes. The term "no-clean" is actually a common misnomer when used to describe a flux
Electronics Forum | Mon Apr 16 09:12:23 EDT 2007 | davef
Standard for appearance: J-STD-001 and IPC-A-610 committees eliminated the requirement that solder connections be "bright and shiny". Certain solderability protections; such as Au, NiPd, NiPdAu; can affect the surface texture of a solder connection,
Electronics Forum | Wed Jan 07 07:16:25 EST 2004 | davef
Cold solder prior to properly performing a well designed drop test. Actually, "cold solder" means different things to different people. Two dull solder connection conditions are: * "Disturbed" solder joint: a solder joint that has an "angular face
Electronics Forum | Wed Aug 06 20:50:42 EDT 2003 | davef
Well, if it "keeps coming up", let's take a pass at keeping down. For: * Requirement that gold be removed from components, pads, etc. is J-STD-001C, 5.4.1 * Context of that requirement [J-STD-001C, 5.4.1] and 6 or 7 references are in IPC-HDBK-001.
Electronics Forum | Thu May 23 18:10:54 EDT 2013 | davef
I agree with Rob. These solder connections are unacceptable. BR, davef
Electronics Forum | Tue Oct 07 08:38:05 EDT 2003 | davef
J-STD-001C requires removal of gold from (through-hole) component leads when the thickness of the gold layer is above 2.5 microns to prevent problems with embrittlement. The thickness of gold on an ENIG board typically is around 0.05 micron, resultin
Electronics Forum | Thu Jul 07 07:09:16 EDT 2016 | soldertools
BEST is an IPC Master Certification Solder Training Center offering Instructor and Operator courses for IPC-A-610, IPC J-STD-001, IPC/WHMA-620, IPC-A-600, IPC-6012 and IPC 7711/7721. BEST is also known world widely for PCB repair kits and materials t
Electronics Forum | Tue Oct 15 17:54:08 EDT 2019 | davef
From J-STD-001: Components designed for pin-in-hole application and modified for butt connection attachment, or stiff-leaded dual-inline packages (e.g., alloy 42, brazed or tempered leads) may be modified for use on Class 1 and 2 products but shall n
Electronics Forum | Wed Jan 30 17:44:38 EST 2002 | davef
The gold is compatible with your solder. Gold will dissolve in your solder very quickly. Assuming you have a fairly large [~ couple hundred pounds] solder pot, the gold will not, over the short term, affect the performance of the pot. The issue is
