Electronics Forum | Mon Mar 17 18:37:59 EDT 2008 | aqueous
We manufacture both bulk and localized ionic contamination testers. My answer is from the perspective of the cleanliness testing method. The issue with all bulk ionic contamination testers (Ionagraph, Omegameter, Zero-Ion), is that they test the en
Electronics Forum | Thu Sep 05 22:36:38 EDT 2013 | davef
Yes, providing your: * Inbound material does not compromise your process. * Soldering processes apply the proper amount of flux and activate it properly * Material handling does not contaminate your boards Recognize that the IPC requirements of less
Electronics Forum | Wed Nov 10 17:52:28 EST 2004 | Dave
You can start with J-STD-001 for assemblies or IPC-6012 for Bare Boards.
Electronics Forum | Wed Nov 10 18:55:04 EST 2004 | Dreamsniper
J-STD-001 8.4.1 Chlorine content should not exceed the following:
Electronics Forum | Thu Nov 11 09:16:48 EST 2004 | Dreamsniper
J-STD-001 8.4.1 Chlorine content should not exceed the following:
Electronics Forum | Fri Aug 30 22:51:14 EDT 2013 | cvogel
IPC-J-STD-001E in regards to Ionic Cleanliness standards states less than 1.56 µg/cm² of total NaCL. Assuming a typical electronic process which involves smt, wave, and post-hand soldering and uses NO-Clean flux throughout all process, is it typi
Electronics Forum | Thu Feb 05 18:16:37 EST 2009 | adamcrum
Can somebody help me to understand what standards are in place for deinozed water for cleaning circuit boards. I know they are supposed to be in acordance with J-STD-001D, but what does that entail? All I can find on the internet is that J-STD-001D a
Electronics Forum | Thu May 31 10:25:19 EDT 2012 | edmaya33
J-STD-001E, 8.3.6.2 states 1.56um/cm2 NaCl value.
Electronics Forum | Mon Nov 02 22:04:30 EST 2015 | davef
An ionic contamination tester should meet industrial cleanliness specifications including MIL-STD-2000A, MIL-P-28809, J-STD-001 and Resistivity of Solvent Extract (ROSE) Test Method IPC-TM-650 2.3.25
Electronics Forum | Mon Feb 21 20:15:49 EST 2022 | arminski
since IPC-J-STD-001 RevH obsoleted the 1.56ug/cm2 UCL of ionic contamination tester in testing using ROSE test, how do you define the acceptable limit per PCB assembly? thanks
winsouce.jpg)
.gif)
.gif)
