Electronics Forum | Mon May 23 11:37:36 EDT 2005 | dougt
AND A B C -------- 0 0 0 1 0 0 0 1 0 1 1 1 C is the result Are you studying for a test?
Electronics Forum | Tue Nov 23 19:00:30 EST 1999 | armin
I've got a 100mm X 70 mm Dense PCB...The via holes used is 1.0 mm some are under SOIC's ...what problems that this type of via design poses ? all ideas are welcome ! thanks and regards, armin
Electronics Forum | Tue Jul 11 05:40:50 EDT 2017 | youth
I think most manufacturers do not meet this requirement, 2 / 2mil line is too thin, easy to disconnect
Electronics Forum | Thu Jul 13 21:49:11 EDT 2017 | dawson
it's said that MADPCB is trying to manufacture this pcb prototypes for check whether they can put it into mass production.
Electronics Forum | Mon Nov 22 11:19:39 EST 2004 | davef
Short answer: Yes. Depending on the application of the conductive ink, suppliers select different mesh for the silver particles. So, you should follow your supplier's recommendations for printing, for instance: Conductive Ink||PI-2000 Highly Condu
Electronics Forum | Wed Aug 31 09:06:11 EDT 2005 | PWH
Agree with Siverts. We do a build that has 0.3mm pad diamter BGA (0.8mm pitch - distance from pad center to pad center) and 0.5mm dia. BGA balls. Stencil specs. are: 5 mil. thickness, square BGA pad aps. (1:1, 0.3mm square aps), laser cut. Seems
Electronics Forum | Tue Jul 13 13:37:23 EDT 2010 | pjc
That's cold compared with this specification from a leading oven mfr.: Flow Rate - 1.0 - 3.0 US gal/min (3.79 - 11.4 l/ min) • Inlet size and pressure - 0.5 in. male NPT; 310 - 483 kPA (45 - 70 psi) • Pressure drop - 200 kPa @ 11.4 l/min (30 psi @ 3
Electronics Forum | Tue Sep 10 19:08:59 EDT 2002 | cp743
Brian, I believe that someone has given you incorrect info. Both of these vision types ignore protruding nozzles during vision processing. I am currently running 1608 components with a 1.0mm nozzle on a CP-643E series machine utilizing vision type
Electronics Forum | Tue May 11 12:23:40 EDT 2004 | Mark
Just wondering about feeders 8x2 with .7 nozzles and cover. Wondering if anyone that reads this has any extra feeders for sale or know of a house with some for sale? Got some 0402 coming my way and we only have 8x4 with 1.3 covers and 1.0 covers.
Electronics Forum | Tue May 11 17:50:41 EDT 2004 | longpham246
Just wondering about feeders 8x2 with .7 nozzles > and cover. Wondering if anyone that reads this > has any extra feeders for sale or know of a house > with some for sale? Got some 0402 coming my way > and we only have 8x4 with 1.3 covers and 1.0
