Electronics Forum | Fri Mar 08 15:23:15 EST 2024 | tommy_magyar
They have a software called JaNets to do that. I only briefly worked for a couple of months with Juki, but JaNets did what you are asking for. Most likely you will need licence from Juki for that. Regards, Tom
Electronics Forum | Tue Feb 28 11:14:40 EST 2023 | dontfeedphils
Juki should have a system like that. Pretty sure it's a part of the IS suite of software, but it's been 6+ years since I've dealt with Juki.
Electronics Forum | Wed Mar 01 15:06:47 EST 2023 | dontfeedphils
Then you must be missing a piece of the software suite because I was able to keep and maintain "master" programs on the IS server and then create "job" programs each time they ran a job and those were sent to the machines from a central line control
Electronics Forum | Mon Jul 01 03:40:02 EDT 2019 | robl
Hi Janet, You could pick up an Emerald very cheaply these days, which is very similar except has 2 heads and can go to 15-17mm high. May be cheaper than trying to modify a topaz & vision system. Same software, feeders etc.
Electronics Forum | Sun Mar 05 12:53:08 EST 2023 | dontfeedphils
I actually still have all my docs and software from that time. Just dug through some manuals and found one for "IS - Intelli PD" (program download). Couldn't tell you if this is still what it's called, but this is what we used to send pro
Electronics Forum | Sun Jun 30 04:25:57 EDT 2024 | sarason
There is a Chinese software product called "Programming" from Ealead. https://ealead-e.ucoz.com/index/eps/0-10 The Ealead software makes spliting your product over a multi-machine line, even if they are not from the same manufacturer easy! My soft
| 1 |
