Electronics Forum | Thu Feb 26 10:26:57 EST 2004 | KenM
I am trying to find a source for a flat conveyor belt for an old post wave flat belt conveyor at a reasonable cost. Any ideas would be appreciated.
Electronics Forum | Fri Feb 27 11:22:46 EST 2004 | pjc
Contact Insertech N.E. Inc. at 978-433-3116. They are a used equipment supplier up in MA. I was in their shop recently and saw two wave exit conveyors- flat belt.
Electronics Forum | Thu Mar 04 12:49:56 EST 2004 | haviland
Good morning. We have available several decline and several flat bed belt style exit conveyors, including a couple w/ cool down fans above the belt, e.g., a Kanetic48" OAL w/ 18" wide belt plus (8) fans priced at $1,000.00 FOB IL.
Electronics Forum | Mon Oct 06 18:24:34 EDT 2003 | pjc
what type of belt is it and what material is it? round belt, flat belt, etc... if its from a PCB transport conveyor or other PCB handling system, I recommend you contact the OEM. I have spliced belts before- rubber round belt off old Fuji loader and
Electronics Forum | Sun Oct 16 04:23:20 EDT 2005 | olas
I have a couple of questions about the SMEMA conveyor (standard 1.2); I posted the question to them but had no answer. SMEMA says: 5) Maximum gap. The maximum gap between the in-line machine track ends is 0.375� I would suppose this gap refers to th
Electronics Forum | Thu Oct 14 08:14:36 EDT 2010 | rway
We use both Panasonic and JOT. JOTs are a good conveyor. The Panasonics will probably cost you less. Check the used equipment market. That's where we got all of ours and I haven't had any issues with any of them except the normal where and tear o
Electronics Forum | Thu Apr 02 10:50:24 EDT 2015 | fnorradd
Hi All, Does anyone have any companies where I can purchase all the spares for JOT conveyors. Bearings, belts, motors, etc. Any feedback much appreciated.
Electronics Forum | Tue Oct 07 12:40:57 EDT 2003 | ssnow
OEM no longer in existence. hard to find exact match. belt is flat and green. used for PCB transport.
Electronics Forum | Mon Mar 20 11:08:17 EST 2006 | Chunks
Spare parts? Like what? If it's your belt motor, try cleaning out the gear box attached to it. 99% of the time it's the lube in this gear box that dries out and turns to glue.
Electronics Forum | Thu Jul 22 07:30:21 EDT 2010 | nitronica1
does anyone know where I can get replacement conveyor/drive belts for a Fuji/astro pcb 0.5m conveyor? pref from the UK or europe the length of the belts are approx 630mm and 6mm wide, flat with bumps on bottom side
.gif)
.gif)
