Electronics Forum | Mon Jul 13 20:24:10 EDT 2020 | emanuel
Can't find the correct part number for the conveyor belt of a DEK Europa. It is round and green, perhaps antistatic type. I found the part number of the same for 265GSX, it is 122022 G4957. Any idea if the Europa uses the same belt size as the 265GSX
Electronics Forum | Tue Nov 29 01:11:34 EST 2005 | ajay
I am looking for purchase of EKRA E4 spare from nor EKRA agent. part detail - BELT 80222B-20 L=1835MM 5011000002 Any contact pl. confirm. ajay
Electronics Forum | Tue Jan 05 21:01:40 EST 2021 | brianjones
We are looking at setting up a memory module conveyor belt with a stacker and de-stacker. I will need to handle DDR3 and DDR4 Long DIMM and SODIMM. I will be mounting an image camera under and over the modules. Looks like an edge conveyor would be be
Electronics Forum | Sun Nov 07 21:00:15 EST 2010 | mainenetservices
sounds like its probably a timming belt. stock drive products is the place i go for robotics mechanical stuff, They likely have a sutable belt if you can get a good mesurement on everything(mesure the pully teeth, the belt may be streched). https://
Electronics Forum | Thu Jul 22 07:30:21 EDT 2010 | nitronica1
does anyone know where I can get replacement conveyor/drive belts for a Fuji/astro pcb 0.5m conveyor? pref from the UK or europe the length of the belts are approx 630mm and 6mm wide, flat with bumps on bottom side
Electronics Forum | Wed Jun 13 16:09:28 EDT 2007 | rgduval
The parts were soldered in place on the first side. Any recommendations on material for this kind of fixture? I've shimmed boards off the belt before with titanium wave plows...but, I'd love to find something slightly more elegant.
Electronics Forum | Fri Nov 05 22:45:04 EDT 2010 | wingding
Does anyone know where to but parts for Hover Davis feeders. I need a 18 ½ x 1/8 inch drive belt for a Fuji feeder.
Electronics Forum | Wed Jun 13 14:48:48 EDT 2007 | rgduval
Is there a sort of standard method to prevent part loss in reflow? I've had a couple of situations come up recently where we've lost some parts during second-side processing. We're running an Heller 1800, with a mesh belt. Most items process fine,
Electronics Forum | Thu Nov 18 08:43:30 EST 1999 | Will Buehler
We currently stuff parts on one side and use a reflow oven. We have been told that many companies are stuffing both sides without high-temp solder or glue. I understand that glue is usually only needed for wave soldering processes. Is it true that
Electronics Forum | Tue May 19 14:38:07 EDT 2020 | dnachristen
Ok still looking for a supplier for NEW belts. Not drive belts but what is seen in the picture.
winsouce.jpg)
