Electronics Forum | Wed Sep 20 10:36:27 EDT 2006 | proy
I am considering moving my spray fluxer into a completely separate operation. Has anybody any comments of sraying VOC free flux on boards, then putting them in a drier/holding rack for possibly say overnight, then running them through wave solder?
Electronics Forum | Mon May 16 18:03:30 EDT 2005 | davef
Key Issue: Will this machine solder your boards? You never know until you solder one. Any other avenues of analysis involve substantial risk. Flux Selection * High or low solids * VOC or VOC-free Solder Alloy * If using lead-free, avoid stainles
Electronics Forum | Mon May 19 10:35:58 EDT 2008 | samir
I agree with RealChunks. The application of any of these "wave solder process control tools" is dependant on how the shop is run. At some shops, PM is inconsistent and slacked off on. At other shops, there is no technical expertise at the operator
Electronics Forum | Sat Feb 15 15:39:53 EST 2003 | Joe
I have the identical machine and setup as you with the same issue(s). I looked at setting up for N2 but am choosing to retrofit to a standard lambda nozzle setup. If you are soldering bottom side SMT parts or other challenging assemblies, N2 may ma
Electronics Forum | Tue Oct 20 19:26:10 EDT 2009 | fdbittner
I think machine selection depends upon your application (pitch, volume, changeover from pb to pb free etc...) I have experience with ERSA and Pillarhouse Jades. Both very good in their own right. Pillarhouse are relatively cheap, and quick to chan
Electronics Forum | Fri Apr 23 15:10:45 EDT 1999 | Chrys Shea
| We are an assembly house engaged in large volume manufacturing of Computer motherboards and others. We are in the process of selection of a new wave soldering machine. Can somebody help me inform what are the different parameters which must be ens
Electronics Forum | Thu Apr 29 16:56:16 EDT 1999 | Kevin Hussey
| | We are an assembly house engaged in large volume manufacturing of Computer motherboards and others. We are in the process of selection of a new wave soldering machine. Can somebody help me inform what are the different parameters which must be e
Electronics Forum | Mon Feb 20 15:03:56 EST 2006 | davef
Q1- Will we be able to select the materials (flux and alloy) and run the process depending only on ourselves, distributors� help, machinery documentation, web data and �trial and error?� A1- Your materials suppliers [eg Kester, Alpha Metals, etc] wil
Electronics Forum | Fri Oct 17 09:31:21 EDT 2014 | rgduval
To be honest, I have never had success wave soldering or reflow soldering batteries, regardless of their intended use. If you're going to continue a manual operation to solder one pin, I'd suggest that you just solder the entire component in by ha
Electronics Forum | Mon Oct 27 09:47:39 EST 2003 | yiannis
hi, Are there users of Aura - a wave soldering machine of Automation ?. I d like to buy a copy of the manuals and to ask a few questions. Thanks
