Electronics Forum | Mon Aug 31 16:36:52 EDT 2020 | emeto
your troubleshooting makes sense to me. If the drives are replacable, replace X and Y drivers and see if the error moves with the driver.
Electronics Forum | Mon Dec 07 11:45:51 EST 2020 | Madel
Have Aqueous Technologies SMT1000 . Need help, looking for a copy of the drivers . I have the flash program . Appreciate any assistance with this. Thanks.
Electronics Forum | Thu Mar 22 17:03:59 EST 2001 | williamh
I have been using an MPAV and MVIIF for about 3 1/2 years and have had some difficulties, mainly with the MPAV. After only 2 1/2 years of use we had to replace the laser because we were having alot of QFP's being mismounted. That was an $8,000 expe
Electronics Forum | Wed Feb 20 15:21:56 EST 2013 | rmitchell
Hi, hopefully I am too late, it is fixed and you are up and running. Have you tried MPM support on the phone? We have 2 older MPM's and the blow the driver modules in the bottom drawer on the back of the machine. There are different drivers for dif
Electronics Forum | Fri Aug 30 15:44:51 EDT 2019 | valentink
I will try outline Theta and Z-axis servo issues, we were facing last time. Story behind. Our 750 is used seldom and last time after switching it on initialization procedure ends with T axis of right head: Servo alarm. Opening front cover of 750 two
Electronics Forum | Fri Sep 24 10:43:42 EDT 1999 | Ken Kkoyen
| The machine is a Universal 6796 DIP inserter. The driver card for the X axis burned a couple of resistors and a trace, probably a couple of power transistors too. I had a spare card and put it in. Now on powering-up the machine, the X-Y table mo
Electronics Forum | Fri Sep 24 13:44:06 EDT 1999 | Eric Lee Williams
| | The machine is a Universal 6796 DIP inserter. The driver card for the X axis burned a couple of resistors and a trace, probably a couple of power transistors too. I had a spare card and put it in. Now on powering-up the machine, the X-Y table
Electronics Forum | Mon Sep 26 18:46:37 EDT 2005 | stano
Hello. We have problem with MPA-V. Problem is with V1, V2 axis. Error is V1 AXIS MOVEMENT IMPOSSIBLE and V2 AXIS MOVEMENT IMPOSSIBLE. On the driver for this axis lighting error LED ST (sensor touble). It is problem in connection between motor encoder
Electronics Forum | Tue Dec 01 15:32:27 EST 2020 | spoiltforchoice
Could be your graphics card driver is set to output a resolution/refresh rate not supported by either monitor you tried. In that case XPs "Safe Mode" should use safe defaults just like it is doing when you see the loading bar. Another option is someh
Electronics Forum | Thu Oct 14 08:09:30 EDT 1999 | davedietek
Looking for users of TAB/TCP for LCD Drivers and special applications.
winsouce.jpg)