Electronics Forum | Sat Sep 18 03:50:23 EDT 2010 | vinitverma
I know of Ambitec (Taiwan). They make feeder calibration jigs where the base is common for all types of feeders. You just need to replace the jig on the base depending on the feeders you're trying to calibrate. They provide base as well as jigs for m
Electronics Forum | Thu Sep 27 10:20:46 EDT 2001 | John S
The feeders on the Juki 750 machines have about 0.060" slop in the x-axis. Which allows the machine to try to pick up the part on the edge,inverting it. With the auto-correct feature enabled, the machine locates the feeder pocket based on its pick
Electronics Forum | Thu Apr 12 02:23:52 EDT 2018 | spectrumsmt
Juki is well supported in the US Stephen. When you get sorted out then come to us for custom nozzles for LEDs. That is what we do! Also OEM feeders and nozzles.We are based in the UK and also Phoneix AZ Good Luck in your ew venture IAn
Electronics Forum | Thu Jun 21 09:02:40 EDT 2018 | spoiltforchoice
I'd be tempted to say you buy whatever is most consistent with what you paid for the rest of the machine.... And if you can source Chinese copies& they aren't expensive it can't hurt to try a few. More generally (I don't know how these particluar ma
Electronics Forum | Thu Jan 25 13:54:51 EST 2018 | emeto
The best way is to have proper system in place that shows which reel is stored where. Now mycronic, juki, fuji and more have these towers(MSD), where you can keep your parts in. It is a very elegant solution with a beautiful software that tells you w
Electronics Forum | Wed Mar 07 07:08:30 EST 2007 | Rob
They are very long with lots of feeder positions & have a fast tape loading mechanism. They are also easy to use and upgrade, and are cheap on the second hand market. However, on the flip side they are slower (the hydra figures are just dreaming as
Electronics Forum | Wed Mar 28 03:32:33 EDT 2018 | reckless
So I found an early model samsung sm320 for under $20k BUT it needs a new motor and has 15,000 hours (not sure what life of one of these is but hardly seen a Samsung with 20,000 hours). The Juki 750 was highly recommended and its under $10k with fe
Electronics Forum | Sat Jul 17 15:22:17 EDT 2004 | rohman23
Thanks for all the responses. I do agree with what was said, and can certainly see reasons not to try. I'll write a little more about what we do. We are a defense contractor, and as I mentioned very high mix, low volume. We only have 1 SMT line.
Electronics Forum | Mon May 17 10:59:02 EDT 2021 | kumarb
Hi. Have an Emerald-X machine with FNC purchased refurb from Assembleon with mixed results at 3500 hours. Had it sitting idle for years due to assorted issues after their installation. Only now after much time and parts investment have the machinery
| 1 |
