Electronics Forum | Sun Nov 02 05:32:03 EST 2025 | _cd_
Thanks Sarason. I haven't had much luck with Juki America, though to their credit, they did respond to me, the only Juki branch that did. Unfortunately it was to tell me I needed the sewing machine division and later that all their technical data had
Electronics Forum | Thu Oct 23 15:23:28 EDT 2025 | sarason
~100 mV on logic rails can break comms. • Inspect and reseat edge and ribbon connectors; clean oxidised contacts; verify chassis ground and shield continuity. 3. Comms layer sanity check • Trace the cable from the CPU/HMI to the module: many o
Electronics Forum | Mon Jul 11 21:46:19 EDT 2011 | garym4569
Anyone know how to enable pick tracking for the Juki 730 and 760. Our Juki 750's and 2060 allow me to press the camera button during a production stop to manually check pick position with the camera if the machine stops for no component, laser recon
Electronics Forum | Mon Jul 03 04:18:00 EDT 2017 | leeg
I think the HLC manuals covered mostly the VCS, what is the problem?
Electronics Forum | Fri Jun 30 15:18:24 EDT 2017 | aurash
If anyone has a KE-760 user manual that he/she can share with me please, I would really appreciate it. I do have a KE-750 manual but it doesn't cover VCS (video centering system) which is my main problem. Thanks in advance, Aurash
Electronics Forum | Fri Jul 29 18:00:31 EDT 2011 | daveatdt
There should be a "Tracking" button at the bottom of the screen that you can just tab over to, then press the green start button. I have not worked with the 730, but it is that way on our 740, 750, and 760 machines. Alternatively, you can move the cu
Electronics Forum | Fri Aug 30 16:22:45 EDT 2019 | valentink
Hello Can somebody provide service / maintenance manual from Juki KE-750 (Zevatech FS-750)? Thanks a lot, Valentin
Electronics Forum | Fri May 05 03:07:35 EDT 2017 | beckysu
Hi Muzzy, Good day. Our company main in JUKI SMT spare parts, if you need any of them, pls feel free to contact me. becky(at)hysmt(dot)cn Best Regards, Becky Su
Electronics Forum | Sat Jun 11 03:27:30 EDT 2016 | muzzy
Hello. We have a problem with our Juki 740 machine. It does not start at all, both monitors are blank. The only error we can see is "FAIL" LED on CPU board and red "LD2" LED on "AC SERVO BOARD". Does anyone know what the "LD2" LED means? Or, even be
Electronics Forum | Thu Feb 02 14:23:38 EST 2017 | muzzy
Hi Siltron! Yes, after the repair the "FAIL" led is still ON, but the machine works fine.
winsouce.jpg)