Electronics Forum | Tue Jul 12 10:33:24 EDT 2016 | dontfeedphils
I'd start by checking and reteaching the nozzles (this is automatic, it'll measure the nozzle length and vacuum values for each nozzle). After that double check the value you have entered for the PCB thickness as this will impact where the machine t
Electronics Forum | Fri Aug 26 16:28:27 EDT 2011 | fredc
I have a copy of the Juki catalog "e" and it shows the 750 capable of 0201s but not the 760. We have several customers that get 149s from us to place 0201s. We have also made a custom 101 with one small hole for several machines that would not re
Electronics Forum | Mon Jul 11 10:48:48 EDT 2016 | mnorthey
I have experienced this problem on a number of different machines and have found that it has been one bad nozzle causing the problem. We run Juki 3010 and 3020 and occasionally we have had similar problems. One question, is it bad placements on all 6
Electronics Forum | Mon Sep 05 11:51:30 EDT 2022 | jojoled
Can anybody help with Re-calibrating the Z-axis height in MS parameter , on JUKI KE760L? In MS parameter manual, there is information that these accessories are needed to recalibrate the Z-axis , can anybody tell where to get them, or ideally how to
Electronics Forum | Mon Mar 26 02:41:01 EDT 2018 | robl
Hi Reckless, If it is an Opal Xii with the 8 nozzle conversion it is a no brainer. If it's only got 4 nozzles, then it still has the advantage of being able to place down to 01005 (the 7 series is only 0402), and should be able to handle a wider r
Electronics Forum | Fri Sep 21 16:28:10 EDT 2018 | tey422
Have you run some simple placement test yet? Use double-sided tape on the solder sample, run different size of components to see if all or certain size part are placed off; best with different rotation angle too. Chances are nozzle(s) or even shaft
Electronics Forum | Wed Apr 11 08:00:04 EDT 2018 | spectrumsmt
might like to check the backup on Juki if you are in the UK. we can help with custom nozzles for most machines, especially if you are placing LEDs. Happy to give further impartial advice if you want to PM me Ian Spectrum SMT
Electronics Forum | Sun Sep 15 04:45:22 EDT 2013 | jandon
Cleaning and lubrication requires maintenance training. You can really break something if you don't know what you are doing. For example you can break your expensive rubber nozzles or cameras with inappropriate cleaning. Check: - Piping and joint -
Electronics Forum | Mon Jan 29 07:45:06 EST 2007 | tmoss
HI, I have ran Siemens for 7 years but just started with a company that purchased a new Juki 2055-RE and a new 2060... These machines have some real nice features on them that I love... Though not as fast as your turrent head machines, I believe the
Electronics Forum | Tue Jan 30 07:24:08 EST 2007 | tmoss
HI, I have ran Siemens for 7 years but just started with a company that purchased a new Juki 2055-RE and a new 2060... These machines have some real nice features on them that I love... Though not as fast as your turrent head machines, I believe the