Electronics Forum | Thu Jan 05 14:42:35 EST 2006 | gipos
I wonder if you have any experience with mating 760 to 730. What about suport for 700 series? You have 760 still running good.How many years they have to service machines after purchase. Is the 2060 significantly better than 760 regardless capacity?
Electronics Forum | Sat Mar 04 11:07:21 EST 2006 | charls
hi pavel, If you are getting vibrate during fast mode, encoder or motor cable might be faulty. yes i faced the same problem in Juki KE2010 m/c. Try by replacing encoder & motor cable from Motor to driver unit. All the best
Electronics Forum | Wed Mar 08 08:37:24 EST 2006 | wbartley
Pavel First off I agree with Newton It sounds like the machine may not be level. Check all four feet while the machine is warming up none of them should be moving up or down. Chances are your right front or left rear foot is not at the right height.
Electronics Forum | Thu Mar 02 05:07:51 EST 2006 | pavel
We have bought an old zevatech 730 in Bosch auction (hello MikeZIG). There seems to be something wrong with the X axis servo, the machine is vibrating when the head is moving fast (in fact the machine is dancing, in the race with washing machine it w
Electronics Forum | Thu Jan 05 14:54:43 EST 2006 | John S.
Cannot speak to the 760, but we've been running 3 750's for seven years now. Never needed to call a service technician in. Juki is our benchmark for customer service. We run approximately 20 hrs per day 5 days a week. John S.
Electronics Forum | Thu Jan 05 14:00:40 EST 2006 | Steve
We are currently runing a JUKI 750 and 760 as well as a 2060. I can't say enough good things about the quality of the machines and service from JUKI. I've had zero downtime in the last 2 years due to mechanical breakdown and our machines run 18 hours
Electronics Forum | Thu Dec 13 05:58:05 EST 2018 | ccarterr
Hello, I have re4ecently been tasked with maintaining/repairing several Juki 750-760 SMT machines. Are there any online resources or training available that would help me in my endeavors?
Electronics Forum | Sun Jun 06 02:47:33 EDT 2004 | ravi
hello friend, if you have any problem, Zevatech m/c is handling by JUKI -Japan. You contact to juki, They will help you in deep.
Electronics Forum | Sun Aug 21 15:35:22 EDT 2022 | zadir
good afternoon, please tell me, maybe someone has encountered a problem on the juki 730/740 machine.we have a 24 volt 10 amp power supply broken on it (it stopped turning on completely) we changed it, but now stanou can't find the zero point, he come
Electronics Forum | Wed Mar 23 18:02:31 EDT 2011 | fredc
Hello Scott, We have sold modified 101 nozzles. They had a .25mm hole instead of standard. The customer ordered these for placing 0201s. Is it possible they were used on the 740 machine? Or maybe the 760? FredC
winsouce.jpg)
