Electronics Forum | Wed Mar 28 03:32:33 EDT 2018 | reckless
So I found an early model samsung sm320 for under $20k BUT it needs a new motor and has 15,000 hours (not sure what life of one of these is but hardly seen a Samsung with 20,000 hours). The Juki 750 was highly recommended and its under $10k with fe
Electronics Forum | Wed Mar 28 11:59:32 EDT 2018 | robl
15000 hours is nothing we have Jukis and Assembleon/Yamaha's on 50K. What maters is how they are looked after. Ours are looked after very well. Also, what does the programming software cost? Regarding the Quad 4C, yes the support would be great,w
Electronics Forum | Mon Jul 15 18:29:46 EDT 2024 | ktm250rider
Surprisingly, i found my answer shortly after posting. I was just staring at the main menu and there is a setting for start step, end step and total steps. The end was set to 3. Not sure why. When i changed it to 6 all worked out. However, on o
Electronics Forum | Fri Jul 21 17:25:02 EDT 2006 | ahmedrehan
For calculation let me keep future production in mind so for producing 1000 board/day X 110 component means 1,10000 / 8hr/day = 13,750 cph so I have to select a chip shooter between 15-20k cph. any sujested model of Fuji or Panasonic with this speed.
Electronics Forum | Fri Jun 15 10:26:12 EDT 2018 | ks0707
Hello everybody, I’d like to hear your advice regarding the programming for multiple Pick & Place machines. My company is a Contract manufacturer located in SF Bay area and has 4 SMT lines with 11 Pick & Place machines. The good thing is that all o
Electronics Forum | Mon Jan 21 07:01:02 EST 2013 | ericrr
I can not believe this, We get back from Summer holidays turn on the first machine Juki KE750L goes to do a home and before the head moves, Error notice: rear feeder rise error, I go around the back, nothing out of place. but notice the receiver end
Electronics Forum | Tue Jan 24 16:35:16 EST 2017 | siltron
Hi everyone, We bought a used Juki KE a few months ago. Installed it at the beginning of this year, but have some problems with the Z and ROT servos. As soon as the machine is powered on, the ALM04 red led turns on on some of the Z and ROT drivers.
Electronics Forum | Thu Apr 05 10:03:28 EDT 2018 | roblackey
Lasers can go quite often, but if you are lucky and not in a great hurry you can get them refurbished dirt cheap. If you have a good 750/760 that has been well maintained it should run for a long time, but if it has not been loved you can end up payi
Electronics Forum | Mon Mar 26 02:41:01 EDT 2018 | robl
Hi Reckless, If it is an Opal Xii with the 8 nozzle conversion it is a no brainer. If it's only got 4 nozzles, then it still has the advantage of being able to place down to 01005 (the 7 series is only 0402), and should be able to handle a wider r
Electronics Forum | Thu Aug 16 08:15:04 EDT 2018 | muzzy
Hello! Does anybody know how to access the "MS Parameters" window on older JUKI Pick and place machines? (mainly on 730, 740, 750, 760). Service manual mentions that it is possible to change all of the mechanical parameters from there (like for examp
.gif)
