Electronics Forum | Mon Jul 11 21:46:19 EDT 2011 | garym4569
Anyone know how to enable pick tracking for the Juki 730 and 760. Our Juki 750's and 2060 allow me to press the camera button during a production stop to manually check pick position with the camera if the machine stops for no component, laser recon
Electronics Forum | Tue Jan 03 03:01:35 EST 2006 | Frank
The 740 and 760 basically have the same specs as far as component ranges: 0402-50mm components. The 760 is a bit more accurate and the vision system is better. The 740 was designed when BGA weren't really around and so it can barely vision center b
Electronics Forum | Fri Jul 29 18:00:31 EDT 2011 | daveatdt
There should be a "Tracking" button at the bottom of the screen that you can just tab over to, then press the green start button. I have not worked with the 730, but it is that way on our 740, 750, and 760 machines. Alternatively, you can move the cu
Electronics Forum | Thu Apr 05 10:03:28 EDT 2018 | roblackey
Lasers can go quite often, but if you are lucky and not in a great hurry you can get them refurbished dirt cheap. If you have a good 750/760 that has been well maintained it should run for a long time, but if it has not been loved you can end up payi
Electronics Forum | Fri Mar 09 11:09:56 EST 2018 | reckless
Most likely I am doubling the budget mostly because of the feeders. I am leaning to Juke 750/760. Most likely will end up buying 2 of them once we are fully up and running and understanding everything. We are looking for a good old dinosaur who
Electronics Forum | Wed Aug 10 09:56:09 EDT 2022 | jojoled
Hi guys, from certain time (not sure, but it could be power down last week) none of the 2 heads can succesfully pickup nozzle from ATC (after startup calibration is done, but in the calibration sequence the ATC height is not measured, it just calibra
1 |