Electronics Forum | Thu Sep 23 11:28:57 EDT 2004 | Frank
We have placed labels using the Hover-Davis label feeders on our Juki machines and we used standard nozzles. Are your labels an odd shape where a standard nozzle won't work?
Electronics Forum | Thu Feb 05 08:39:35 EST 2004 | pjc
Dave is correct in that the Zevatech is actually a Juki. Made by the Japanese Juki and labeled by the Swiss Zevatech. The PM 575 is somewhat vintage. I believe it may be all mechanical component centering. It may be OK for the 20mil fine pitch but ma
Electronics Forum | Thu Jan 14 11:23:35 EST 1999 | Mike McMonagle
Reginald, McMaster-Carr Supply also carry them from a company called Thermographics (617-734-1018). I would caution agaist using them for anything except the simplest of measurements, there's a big difference between measuring your laminate s
Electronics Forum | Fri Sep 24 12:02:57 EDT 2004 | Frank
Yes, I can see your problem, the nozzle makes only good contact in the center and so the ends don't make good contact. The ends tend to curl up during reflow. There were two suggestions to solve this. 1) Let the operator push down the labels befor
Electronics Forum | Mon Aug 18 16:54:46 EDT 2008 | jlawson
Great to see running. The Vision Monitor Video comes from the Vision Processor Card, including overlay info, grids etc depending on mode you are in, like teaching etc Why is is on still I can not say, could be software version, there was several ve
Electronics Forum | Wed Aug 20 08:55:59 EDT 2003 | caldon
ADLSMT- I do not know of any standard but do know each town, city, county, and state have different governing rules. Some require a fire suppression system and some insurances require this as well. As far as Supplies go we get most of our stuff from
Electronics Forum | Tue Jan 28 12:32:44 EST 2020 | jede
We have had a few large human error, wrong placement in the SMT set up over the past year(same package size placed in the wrong feeder position to where it goes unnoticed) and we are trying to look for possible process improvements to prevent this fr
Electronics Forum | Thu Jan 05 14:04:44 EST 2023 | unisoft
>> The Unisoft ProntoPLACE software ( https://www.unisoft-cim.com/pcbplace.php ) creates programs from CAD or Gerber or XY rotation and BOM files for setup of SMT Pick & Place, thru-hole, manusert & dispensing machines, and includes the basic feature
Electronics Forum | Mon Sep 03 21:33:41 EDT 2018 | aemery
Jeff R, The "24VS" stands for 24VDC Voltage Switched; meaning that it is supplied under machine control and other things have to happen in the machine before 24VS is applied, in this case to KP1 coil. KP1 coil/contact is in place as part of the pow
Electronics Forum | Mon Nov 09 09:44:22 EST 2015 | davef
Purpose. This describes setting-up a wave soldering system set-up for a new assembly design or checking a wave solder machine operation with a test board. Applicability. To be used for new design printed circuit assembles and during machine accept
