Electronics Forum | Tue Oct 18 12:07:06 EDT 2011 | emeto
Does anybody know where I can find juki vibratory stick feeders. Juki doesn't offer them any more and I was wondering if some of you doesn't have any that you are not using.
Electronics Forum | Fri Mar 09 19:08:42 EST 2018 | sarason
Their is a large aftermarket support system for Juki parts, feeders etc in China. You can buy aftermarket Juki placement heads, nozzles, feeders at a fraction of the price you had to pay when you bought these machines new. Just make sure to exclude J
Electronics Forum | Thu May 18 11:55:15 EDT 2006 | RLM
Is a Juki feeder a stand alone unit or does it need to communicate with the assembler ? I can operate a Quad feeder just by hooking it up to a proper voltage source. No need to communicate with a computer. If the Juki's will operate this way maybe I
Electronics Forum | Sat May 13 00:25:00 EDT 2006 | George S
My Juki 0201 feeders work very well, but I don't know if they can fit your machine
Electronics Forum | Tue Mar 20 14:33:41 EDT 2007 | MEERAZ
JUKI 2000 MACHINES CAN PICK UP SIMULTANEOUSLY ONLY WITH 8MM FEEDERS (4 HEADS AT ONCE) 12 AND 16 CAN BE PICKED UP BY TWO HEADS (OR 3 HEADS KE-2060), HEAD SPACING ARE THE SAME AS 8MM FEEDERS
Electronics Forum | Tue Sep 15 08:50:42 EDT 2009 | babe7362000
Just wanted to know if the Juki Feeder Calibration Jig is worth purchasing? Pros and Cons?
Electronics Forum | Fri Apr 01 10:12:41 EDT 2011 | babe7362000
Does anyone else use splice tape on Juki feeders? If so what kind of splice and what kind of tape is being used to connect them? Thanks for any input.
Electronics Forum | Thu Oct 13 07:17:35 EDT 2011 | babe7362000
I am looking for Juki belt feeders. Does anyone know where I can purchase these at a decent price. I looked up Comtra and it looks like they do no make them anymore. If you have any info that would be great.
Electronics Forum | Thu Oct 27 10:07:06 EDT 2011 | jillatchoice
I have a good source for Juki and Philips feeders. Please let me know what PN you need and I'll check my stock. Thanks, Jill Choice Equipment Inc. jillatchoice@aol.com
Electronics Forum | Sat Sep 18 03:50:23 EDT 2010 | vinitverma
I know of Ambitec (Taiwan). They make feeder calibration jigs where the base is common for all types of feeders. You just need to replace the jig on the base depending on the feeders you're trying to calibrate. They provide base as well as jigs for m
.png)