Electronics Forum | Thu Feb 27 15:21:37 EST 2014 | idscraigsmith
My company uses a Juki KE-2020L and a Juki KE-1070L pick and place. I am trying to locate feeder trolley's with feeder banks that would be compatible with these machines but am having a hard time finding anything. Anyone have suggestions of where t
Electronics Forum | Thu Jun 05 19:19:13 EDT 2014 | FD
When you assign the feeder location, there is a default XY value that gets assigned to that location. When you teach the actual XY pick position you move away from that default position, and if the actual pick position is too far away from the defau
Electronics Forum | Fri Nov 25 11:55:22 EST 2022 | poly
So I'm attempting to run feeder teach for my platform tray feeder... but I've got no idea what first point I should teach is... normal is the end pin of the feeder but this is for the ptf conveyor... so I've got no idea. If I just teach each corner
Electronics Forum | Thu May 18 17:34:06 EDT 2006 | Frank
The Juki tape feeders are mechanically actuated. There is a knock pin on the bottom of the feeder bank that will push up to advance the feeder.
Electronics Forum | Tue Feb 04 13:35:54 EST 2020 | jede
It's not any one specific machine. We use the Juki IS files. In one of the files is the feeder location and I am not able to locate where (was hoping someone had gone through something like this before).
Electronics Forum | Thu Jan 23 14:51:33 EST 2020 | jede
I am trying to write a program to pull the feeder location from juki smt files and I am having trouble locating which file this information is located in. Basically what I am trying to accomplish with this program is to automate the set up process w
Electronics Forum | Wed May 22 08:26:28 EDT 2002 | cyber_wolf
Mydata uses fiducials on their feeders. I am not sure whether or not your are familiar with Mydata feeders, but its pretty basic. The feeders are actually magazines made up of multiple individual feeders. Example: There are 16 8mm feeders in (one)8mm
Electronics Forum | Thu Sep 27 10:20:46 EDT 2001 | John S
The feeders on the Juki 750 machines have about 0.060" slop in the x-axis. Which allows the machine to try to pick up the part on the edge,inverting it. With the auto-correct feature enabled, the machine locates the feeder pocket based on its pick
Electronics Forum | Mon Nov 17 07:15:36 EST 2014 | garym4569
If you have feeders that you want to always stay on the same machine/position, enter them in the permanent data for the machine in the MSL setup. That is a simple way to reserve locations. Also, the optimization can use any common parts set in perm
Electronics Forum | Fri Mar 17 14:41:28 EDT 2023 | emeto
Your request looks like a low volume machine will do it. Juki and Mycronic are both reputable manufacturers that make good quality machines. I did work with both and can say mainly good things about these machines. Now some interesting things to cons
