Electronics Forum | Sat May 24 04:45:20 EDT 2014 | mpolak
Check if that component is not skipped in component data.
Electronics Forum | Fri Jun 06 02:35:06 EDT 2014 | maciejbilu
Got it. That make sense. Pick position is quite far from these "normal" one. I ignore the message (and press start button again) every time and the whole mounting process starts normally. JUKI mount every component assigned except one from 44mm feede
Electronics Forum | Mon May 19 02:11:43 EDT 2014 | maciejbilu
And it run! But the point is that it pick every component except from the 44mm feeder.
Electronics Forum | Mon May 26 02:15:24 EDT 2014 | maciejbilu
No, it is not. Well, here is the strange news: A guy from the service couldn't solve this ! I wonder maby this feeder i just simple not dedidacet for our machine type... or what else could it be ?
Electronics Forum | Mon May 26 04:59:12 EDT 2014 | jandon
Have you try to change feeder place manually somewhere else? Maybe even rear side of the machine?
Electronics Forum | Fri May 16 11:25:48 EDT 2014 | cyber_wolf
Press the green button again and the machine will most likely run. We see these errors on occasion but they do not prevent you from running.
Electronics Forum | Fri May 16 07:04:26 EDT 2014 | maciejbilu
Hello, We had just bought new 44mm one for wide ZIF connectors etc. The problem is that JUKI don't even thin about picking something from it. 44mm option is available in component packaging style window. Tray feeder is choose for "44mm emboss 12mm (
Electronics Forum | Thu Jun 05 19:19:13 EDT 2014 | FD
When you assign the feeder location, there is a default XY value that gets assigned to that location. When you teach the actual XY pick position you move away from that default position, and if the actual pick position is too far away from the defau
Electronics Forum | Mon Jan 21 07:01:02 EST 2013 | ericrr
I can not believe this, We get back from Summer holidays turn on the first machine Juki KE750L goes to do a home and before the head moves, Error notice: rear feeder rise error, I go around the back, nothing out of place. but notice the receiver end
Electronics Forum | Fri Jul 29 07:45:37 EDT 2016 | jbuckley
My company uses primarily mechanical; electric are actually relatively new to us. I do agree that the reel holder is cheaply made, luckily we haven't had one break yet. Because of the longer load time for our operators, we do have feeders prepared fo
