Electronics Forum | Thu Jan 05 14:00:40 EST 2006 | Steve
We are currently runing a JUKI 750 and 760 as well as a 2060. I can't say enough good things about the quality of the machines and service from JUKI. I've had zero downtime in the last 2 years due to mechanical breakdown and our machines run 18 hours
Electronics Forum | Tue May 05 15:12:29 EDT 2020 | electronicsprecis1
I have a Juki 740 that was working great until one day a motor cable broke and after this messege the emergency stop button has been pressed..." error popped up when I turned the machine on. I know the emergency stop works all the way. Does anyone ha
Electronics Forum | Fri Jan 22 03:48:28 EST 2016 | hait
We are using Juki Fx2. Is the cluster programming is possible?
Electronics Forum | Fri Aug 26 10:55:31 EDT 2022 | kumarb
a DOS USB stack will be required. If Windows -> the USB driver for this device will be required. If Juki has a custom OS then even less of a chance of a success. In all cases, you are introducing far too many layers of unnecessary software that is d
Electronics Forum | Wed Aug 24 12:15:57 EDT 2022 | kumarb
We have the Emerald-X (Yamaha YV88X) and used this article and software for our machine. Working very well. https://www.philscomputerlab.com/gotek-floppy-emulator.html# Perhaps consider the software from the above link.
Electronics Forum | Fri Aug 26 09:39:21 EDT 2022 | compit
The emulator doesn't work that way. You can create only 1.44 MB partitions (e.g. 100 pieces on one flash drive) (with the supplied software) and they will be visible as floppy disks. It is not a USB port.
Electronics Forum | Tue Aug 23 09:52:51 EDT 2022 | jojoled
Can anybody recomend exact model number of USB to floppy disk emulator, which works for sure on JUKI KE7xx series PnP machines? I have bought this one : https://www.gotekemulator.com/P_view.asp?pid=54 and have KE760 machine, but it doesnt work (tried
Electronics Forum | Tue Jun 02 13:42:44 EDT 2015 | ldempsey
Hello all, Some background. We have JUKI machines (FX2, KE2000's and KE3000's) We're looking into an issue with 0402's in close proximity to each other. The paste gets mashed into the paste from adjacent parts. Some have suggested I deviate from
Electronics Forum | Fri May 07 04:54:47 EDT 2004 | ravi
hi friend, i will suggest u very god equipment with long life m/c"s , no need of balance in bank for repairing or fast replacement of m/c 1. printer---minami---japan 2. chip shooter--- fx1 juki --japan 3. chip mounter---ke2060 juki---japan 4. replo
Electronics Forum | Fri Sep 14 00:32:37 EDT 2007 | elhardd
Has anyone ever heard of or had any experience with Excerra screen printers? I am looking for an inline printer with vision without breaking the bank bu I need something reliable. We run low volume high mix production. I have a 2 Juki P&P behind i
