Electronics Forum | Fri Dec 22 20:28:44 EST 2017 | 1232kade
Hi everybody. I have some problem that i cant solve, someone pls help me... My Mounter Juki FX-1R cant origin. When i try to origin, the problem appear ( see attach image ) I can control air devices like ATC plate, nozzle,... But cant origin and cont
Electronics Forum | Fri Mar 23 20:08:31 EDT 2007 | Frank
Where did you get the US specs from? This is an observation from our visit to Juki in the US for our demo before we bought our newest machines. The FX-1 was the first generation machine, and it was rated at 25K-IPC. The FX-1R added new hardware,
Electronics Forum | Sat Jul 30 06:02:50 EDT 2022 | sarason
My program PCBSynergy does a conversion between Altium and Juki 700 series , 2000 series and even FX1R, Also yamaha VIOS. It can be found at https://pcbsynergy.com Also lots of other stuff in there for making this job easy sarason
Electronics Forum | Fri Mar 16 14:48:59 EDT 2007 | drt
I noticed a difference in the specifications from the Japan web site to the US site. IPC9850 Speed in Japan is 25,000. US is 27,000. Accuracy in Japan is stated at 50 microns at 3 sigma. US is stated at 40 microns at 3 sigma. 01005 capability is di
Electronics Forum | Thu Jan 18 09:31:47 EST 2018 | Robl
Hi All, Has anyone had any luck with gang picking the same part on Juki 2060 or FX1R's? Example: 100nf 0402, we can pick this part simultaneously from 8 feeders at once on our Yamaha's (or 12 on the old Sapphires), but on the Juki's we don't seem t
Electronics Forum | Thu Oct 04 00:03:28 EDT 2018 | gaintstar
flason smt pick and place machine: http://www.flason-smt.com/product/Hanwha-IC-placer-SM321-High-Speed-SMT-Modular-Chip-Mounter.html http://www.flason-smt.com/product/Hanwha-Pick-and-Place-Machine-DECAN-F2-High-Speed-SMT-Modular-Chip-Mounter.html htt
Electronics Forum | Tue Mar 16 03:20:39 EDT 2021 | cosimaliu
please try to Replace the image card of IP-X5 and confirm whether the problem is solved. cosima@qy-smt.com
Electronics Forum | Thu Jul 01 16:02:45 EDT 2021 | willkillum
Greetings. Make sure the calibration/homing chip is still with the machine and not lost, although you can buy a replacement from Juki for a not-so-nominal fee. Also, have the seller power it up and bring up the Laser image display/edge check. If ther
Electronics Forum | Sat Aug 26 03:12:27 EDT 2017 | ausplex
Hi, We have a Juki KE-730, and was looking to buy a Zevatech KE-730 has a backup and for spares. We thought these machines would be identical, however when we looked at the circuit cards we noticed the image processing cards were quite different. I
Electronics Forum | Fri Jul 29 06:48:11 EDT 2022 | jojoled
I have old JUKI machine, which after power loss seems to have corupted configuration file(all works fine,except Vision configuration for fiducial recognition : camera is unable to read/ write parameters for Vision), can anybody help to tell which fil
