Electronics Forum | Tue Oct 20 23:14:01 EDT 2015 | kiwiguy12345
Hi, I have struck a problem with the X axis on my Juki 740. As soon as I "home" the machine the X driver displays the code "961" Does anyone have any ideas as to a solution for this problem? Thanks!
Electronics Forum | Mon Jan 21 07:01:02 EST 2013 | ericrr
I can not believe this, We get back from Summer holidays turn on the first machine Juki KE750L goes to do a home and before the head moves, Error notice: rear feeder rise error, I go around the back, nothing out of place. but notice the receiver end
Electronics Forum | Thu Jul 01 16:02:45 EDT 2021 | willkillum
Greetings. Make sure the calibration/homing chip is still with the machine and not lost, although you can buy a replacement from Juki for a not-so-nominal fee. Also, have the seller power it up and bring up the Laser image display/edge check. If ther
Electronics Forum | Thu Mar 30 08:04:56 EDT 2023 | hub
Hello, I'm looking for zevatech (juki) 570 owner that could help me to resolve my problem. I had the following error that occure just before (or sometime a few after) homing the machine : "E7018:Driver Error KNOCK position error ". Previsously I had
Electronics Forum | Sat Aug 26 21:53:47 EDT 2017 | kieren
Hi Everyone. I am looking for some help with my Juki Ke750. The problem is that after booting up and then starting the home position function I receive an error as stated below Message File Error E0000: KEY=200078 STATUS=2 C:￥X750 ￥GX3ERROR。MSG
Electronics Forum | Thu Sep 12 08:22:30 EDT 2002 | caldon
YOU think I could let this posting go by with out a reply??? PLEEEEASE. Genny- No matter what direction you go do your home work. This will require a lot of home work on you and your staff. If you go the contract manufacturing route GREAT!!! But hav
Electronics Forum | Wed Nov 02 11:27:45 EST 2005 | rlackey
Depends on the actual requirements of the machine & the skill of the operator, but for that sort of money I've seen Juki 570's with a stack of feeders, Versatronics RV4's, older Mydata's, Samsung CP30's, Essemtec, Philips CSM's etc. I even once bough
Electronics Forum | Mon Jul 25 09:45:39 EDT 2016 | spoiltforchoice
How do you answer that question? You probably won't find anyone who has worked with both which leaves them comparing datasheets just like you presumably already have. http://www.e-by-siplace.com/28657/E-Performance/Overview/e_series_stage.aspx?slide=
Electronics Forum | Mon Aug 31 09:16:54 EDT 2020 | aurash
After reading the machine logs it seems that the problem is on the X-axis but the safety mechanism is disabling all the Servos and the Axis system (all axes) are in error state (that's why the error messages are showing on different axes) The JUKI m
| 1 |
winsouce.jpg)
