Electronics Forum | Mon Jul 11 11:05:53 EDT 2016 | bradholland
thanks for the replies so far. So far I have been relying on the board clamp on the machine that closes when the pwb is loaded. I have also been doing these tests with double sided tape on the pwb so i can clean them off easier afterwards. I have
Electronics Forum | Wed May 19 20:39:28 EDT 2021 | kumarb
Elissa - SMTWenzhan ? She is great !! Have purchased many oddball and common parts from her including belts, filters, grease, etc. BTW - We placed 01005 using a nozzle she sold us with our Emerald-X. Unbelievable !! Granted the pick was hit or miss
Electronics Forum | Wed Jul 02 09:22:20 EDT 2008 | dmunson
Thanks Real Chunks. We currently have an RPS opus selective solder machine that we plan on keeping. It is configured as a 3-nozzle (!) one-pump (!!) point selective solder machine w/ nitrogen preheat. Custom wet nozzles. We use lead free SN100C sold
Electronics Forum | Wed Nov 16 06:02:23 EST 2005 | stefwitt
Are feeders included? Otherwise, the MS 102/132 sell even for lower prices here in US. Add shipping and training and you get to the same result. Juki, Contact and Quad may fall in the same price range, but spare parts and service tech availability wi
Electronics Forum | Fri May 05 09:52:52 EDT 2006 | Rob
I think perhaps you should revisit the choice and take another look at Universal Advantis, I-Pulse M2 & M4(low cost Assemblion), Samsung SM320 or CP45 Neo, Contact Systems C5, Fuji XP series, Juki KE2060, and Siemens Siplace. There is nothing wrong
Electronics Forum | Mon Mar 19 21:55:23 EDT 2018 | stephenj37824
You've got (to my mind) 3 wholly different > classes of machine there. > > Essemtec is upper > entry level maker that is increasingly > differentiating itself from the competing > machines in its class by focusing on 3d > assembly/dispensing op
Electronics Forum | Tue Mar 06 04:58:58 EST 2018 | reckless
My wish would be to put 2-3 smaller 4 nozzle/7000cph desktop units and not in line saving me changeover time. Mostly because of the small real estate footprint. I can put one next to my office running 110V/350W - its small enough to fit on my desk
Electronics Forum | Wed Jul 22 05:54:41 EDT 2015 | langkeauto2015
Hi, Tsvetan, sorry for your bad experience for Chinese brand PNP machine. For your doubt, pls refer to my comment:) Our pnp machine is special for led tube, led panel, led strip, RGB strip, and led display screen PCB, and real working speed feedbacke
Electronics Forum | Sun Mar 18 17:46:10 EDT 2018 | spoiltforchoice
You've got (to my mind) 3 wholly different classes of machine there. Essemtec is upper entry level maker that is increasingly differentiating itself from the competing machines in its class by focusing on 3d assembly/dispensing options. The Puma als
Electronics Forum | Thu Jun 02 18:16:26 EDT 2005 | URI
Look into the Juki KE-2060E machine. I have been > extremely pleased with this machine. It will > hold 80-8mm feeders, place 0201 (0603-metric) up > to 74mm square ICs and BGA, 150mm long > connectors. Up to 25mm tall components. It can > ha