Electronics Forum | Tue Jan 30 07:24:08 EST 2007 | tmoss
HI, I have ran Siemens for 7 years but just started with a company that purchased a new Juki 2055-RE and a new 2060... These machines have some real nice features on them that I love... Though not as fast as your turrent head machines, I believe the
Electronics Forum | Sat Jun 07 23:37:34 EDT 2014 | demzvill
Hello all Good morning. I just want to ask with you guys about the problem that we always experienced in our production. We could not get our target ppm due. to inverted placement of chip resistor. We are using 2000 series juki mounter and cf03hp j
Electronics Forum | Fri Sep 21 16:28:10 EDT 2018 | tey422
Have you run some simple placement test yet? Use double-sided tape on the solder sample, run different size of components to see if all or certain size part are placed off; best with different rotation angle too. Chances are nozzle(s) or even shaft
Electronics Forum | Sat May 13 00:17:40 EDT 2006 | George S
I had Mydata for several years, and got a Juki 2060R about 8 months ago. If I had to choose today, it would be Juki again. The features which help me are bank changing, where I can set up offline and change over in two minutes for all feeders. The
Electronics Forum | Tue Jan 05 20:21:40 EST 2010 | steinerson
Hi Jeff I would recommend you to try unexpensive user friendly Juki Late Model KE760 series. you need a flexible machine that can handle components,fine pitch QFP. This machine is very unique. you can use even without an offline software optimizer,
Electronics Forum | Sun Sep 15 04:45:22 EDT 2013 | jandon
Cleaning and lubrication requires maintenance training. You can really break something if you don't know what you are doing. For example you can break your expensive rubber nozzles or cameras with inappropriate cleaning. Check: - Piping and joint -
Electronics Forum | Tue Aug 23 15:27:38 EDT 2005 | Frank
I know this post is getting a bit old, but the Juki KE-2060 can do 0201 up to 74mm square (or up to 150mm long connectors) on their standard machine. You only need to purchase the 0201 nozzle and feeder. The machine is factory set to run 0201. And
Electronics Forum | Thu Apr 21 06:11:03 EDT 2011 | fadzril
Dear Lisa, as for current, we're using Sony SI-F130 & G200 machines. for my personal opinion comparing to Pana HT122 & JUKI KE2060, Sony machines are very delicate to handle. the precision is good, especially 0603 parts, but for maintenance-wise, it
Electronics Forum | Wed Jun 11 10:01:24 EDT 2014 | isd_jwendell
I do not know the Juki machines, but on my Essemtec I need to turn on the vac after the nozzle is down for 0402 parts. I also cannot touch/hit the current part/tape because it tends to flip the next part from the tape bounce. Then there is also the t
Electronics Forum | Sat Apr 28 21:13:11 EDT 2018 | stephenj37824
So lots of quotes and research later we have eliminated a few added a few to our choices lol. So it looks like we will be doing a decent volume now (due to our other board supplier letting us down as well). Roughly 4-5 million leds/connectors per mon
.jpg)
