Electronics Forum | Thu Feb 24 21:04:29 EST 2011 | ghosteye2011
Various kinds of high quality SMT nozzles, cutters, filters, etc. for more than 10 years, Assembleon nozzle, NXT nozzle, FUJI nozzle, Hitachi nozzle, JUKI nozzle, KME nozzle, Panasert nozzle, Philips nozzle, Samsung nozzle, Sanyo nozzle, Sony nozzle,
Electronics Forum | Thu Oct 04 00:03:28 EDT 2018 | gaintstar
flason smt pick and place machine: http://www.flason-smt.com/product/Hanwha-IC-placer-SM321-High-Speed-SMT-Modular-Chip-Mounter.html http://www.flason-smt.com/product/Hanwha-Pick-and-Place-Machine-DECAN-F2-High-Speed-SMT-Modular-Chip-Mounter.html htt
Electronics Forum | Mon Sep 05 11:51:30 EDT 2022 | jojoled
Can anybody help with Re-calibrating the Z-axis height in MS parameter , on JUKI KE760L? In MS parameter manual, there is information that these accessories are needed to recalibrate the Z-axis , can anybody tell where to get them, or ideally how to
Electronics Forum | Tue Jul 12 10:33:24 EDT 2016 | dontfeedphils
I'd start by checking and reteaching the nozzles (this is automatic, it'll measure the nozzle length and vacuum values for each nozzle). After that double check the value you have entered for the PCB thickness as this will impact where the machine t
Electronics Forum | Wed Apr 11 08:00:04 EDT 2018 | spectrumsmt
might like to check the backup on Juki if you are in the UK. we can help with custom nozzles for most machines, especially if you are placing LEDs. Happy to give further impartial advice if you want to PM me Ian Spectrum SMT
Electronics Forum | Mon Mar 26 02:41:01 EDT 2018 | robl
Hi Reckless, If it is an Opal Xii with the 8 nozzle conversion it is a no brainer. If it's only got 4 nozzles, then it still has the advantage of being able to place down to 01005 (the 7 series is only 0402), and should be able to handle a wider r
Electronics Forum | Tue Jan 30 07:24:08 EST 2007 | tmoss
HI, I have ran Siemens for 7 years but just started with a company that purchased a new Juki 2055-RE and a new 2060... These machines have some real nice features on them that I love... Though not as fast as your turrent head machines, I believe the
Electronics Forum | Mon Jan 29 07:45:06 EST 2007 | tmoss
HI, I have ran Siemens for 7 years but just started with a company that purchased a new Juki 2055-RE and a new 2060... These machines have some real nice features on them that I love... Though not as fast as your turrent head machines, I believe the
Electronics Forum | Sat Jun 07 23:37:34 EDT 2014 | demzvill
Hello all Good morning. I just want to ask with you guys about the problem that we always experienced in our production. We could not get our target ppm due. to inverted placement of chip resistor. We are using 2000 series juki mounter and cf03hp j
Electronics Forum | Fri Sep 21 16:28:10 EDT 2018 | tey422
Have you run some simple placement test yet? Use double-sided tape on the solder sample, run different size of components to see if all or certain size part are placed off; best with different rotation angle too. Chances are nozzle(s) or even shaft