Electronics Forum | Wed Mar 29 17:10:25 EST 2000 | Jon Wentz
Hi Dave, What feeder model do you have? I took a quick look in my parts list manual and again, depending on your feeder model, you might be able to buy the needed part(s) from Zevatech/Juki. Have you checked with them yet? For example, the main feed
Electronics Forum | Wed Aug 22 11:16:14 EDT 2018 | k_moore
Hello SMTnet goers. I have been tasked with repairing and maintaining the company's feeders. I've done as much as I can with the spares we had in stock but I'm now looking at ordering some spares. We have a few suppliers that we have accounts with
Electronics Forum | Fri Aug 31 04:27:19 EDT 2018 | chinafeeder
Hello SMTnet goers. > > I have been tasked with > repairing and maintaining the company's feeders. > I've done as much as I can with the spares we had > in stock but I'm now looking at ordering some > spares. We have a few suppliers that we hav
Electronics Forum | Mon Aug 29 19:41:07 EDT 2022 | assuredtech
I'm not positive on the SFN3 but I have three of the MBF80-SOL which might be more inline to what you are after for 8mm package. It haa 5 lanes. It sounds like the MBF80 is... MBF80-SO/SOL 6-Lane Belt Feeder, 3 SOL, 3 SOIC. 3 SOLIC + 3 SOIC. Edward A
Electronics Forum | Tue Jul 19 12:36:03 EDT 2016 | jbuckley
My company uses both Juki electric and mechanical feeders. Yes, electric feeders are much more efficient than mechanical as far as pick speed and general feed speed. However, if a reel runs out, it usually takes our operators under a minute to change
Electronics Forum | Mon Jul 25 03:39:25 EDT 2016 | rob
A 200% + increase in load time certainly erases > any thoughts of efficiency in my mind. We have tried the Visker Electric feeders out (Yamaha & Juki)and they are nice and smooth, with a faster recovery rate, also adjustable pitch. However, with
Electronics Forum | Fri Jun 24 22:36:17 EDT 2016 | yokywong
now days, I face a problem for JUKI electric feeder and machinery feeder. i do not know about any of electric feeder. until now, we all use machinery feeder for CF081ER 7' real holder and 15' real holder,CF03HPR ,FF12FS,FF16FS,AF24FS-OP. but this tim
Electronics Forum | Tue Mar 20 14:33:41 EDT 2007 | MEERAZ
JUKI 2000 MACHINES CAN PICK UP SIMULTANEOUSLY ONLY WITH 8MM FEEDERS (4 HEADS AT ONCE) 12 AND 16 CAN BE PICKED UP BY TWO HEADS (OR 3 HEADS KE-2060), HEAD SPACING ARE THE SAME AS 8MM FEEDERS
Electronics Forum | Thu May 05 07:58:35 EDT 2016 | cyber_wolf
Not sure what you mean. 0201's and 0402's are both on 8mm feeders. Juki's will do simultaneous picks an all 8mm feeders no matter the component size. Your feeders need to be maintenanced and calibrated to reliably pick 0402's and 0201's. I hav
Electronics Forum | Thu Oct 04 00:03:28 EDT 2018 | gaintstar
flason smt pick and place machine: http://www.flason-smt.com/product/Hanwha-IC-placer-SM321-High-Speed-SMT-Modular-Chip-Mounter.html http://www.flason-smt.com/product/Hanwha-Pick-and-Place-Machine-DECAN-F2-High-Speed-SMT-Modular-Chip-Mounter.html htt
