Electronics Forum | Sat Jun 09 04:11:43 EDT 2018 | jandon
It is Juki CAL PIECE A E3622721000 calibration jig. It is also necessary to have 508 nozzle in ATC.
Electronics Forum | Thu Jun 07 18:59:41 EDT 2018 | smonk
Hello, I have a Juki KE 740 pick and place machine which i purchased used about 1 year ago. I am trying to run the self calibration feature which measures the offset of the placement heads to the camera on the group head. According to the manual som
Electronics Forum | Sun Jun 17 23:04:16 EDT 2018 | jandon
Nice! Place it in jig holder larger holes upward and start calibration. This calibration block is only for the laser heads. Calibration block E5190729000(white dot in the middle of the block) is also for the camera.
Electronics Forum | Sun Jun 17 22:51:17 EDT 2018 | smonk
excellent, thank you. I have one coming in the mail now so we will see if this helps with my problem.
Electronics Forum | Mon Jan 21 08:44:00 EST 2013 | emeto
Hi, as far as I remember Juki machines have sendor to check if there is a feeder high. So you have several thingd to check here: 1. Check if there is a feeder high 2. check the sensor calibration. I think it is a beam from one side that goes streig
Electronics Forum | Tue Sep 15 12:53:17 EDT 2009 | cyber_wolf
We have never needed to calibrate a juki feeder.I have been told that Juki will loan the jig out. Calibrate all of your feeders and send it back....?
Electronics Forum | Sat Sep 18 03:50:23 EDT 2010 | vinitverma
I know of Ambitec (Taiwan). They make feeder calibration jigs where the base is common for all types of feeders. You just need to replace the jig on the base depending on the feeders you're trying to calibrate. They provide base as well as jigs for m
Electronics Forum | Tue Sep 15 08:50:42 EDT 2009 | babe7362000
Just wanted to know if the Juki Feeder Calibration Jig is worth purchasing? Pros and Cons?
Electronics Forum | Tue Nov 17 16:14:59 EST 2020 | aurash
Anyone out there willing to rent me calibration jigs to calibrate the machine offsets for one week? (location is Ireland) Thanks, Aurelian
Electronics Forum | Mon Mar 26 18:25:09 EDT 2018 | tey422
As far as I know, the gang picking or not, it has to do with the pick positions. By what I mean is the X positions and Y positions have to as close to parallel for all those feeders in order for "gang pick" to work. If one of the feeder XY position
