Electronics Forum | Thu Jun 07 18:59:41 EDT 2018 | smonk
Hello, I have a Juki KE 740 pick and place machine which i purchased used about 1 year ago. I am trying to run the self calibration feature which measures the offset of the placement heads to the camera on the group head. According to the manual som
Electronics Forum | Sat Jun 09 04:11:43 EDT 2018 | jandon
It is Juki CAL PIECE A E3622721000 calibration jig. It is also necessary to have 508 nozzle in ATC.
Electronics Forum | Sun Jun 17 23:04:16 EDT 2018 | jandon
Nice! Place it in jig holder larger holes upward and start calibration. This calibration block is only for the laser heads. Calibration block E5190729000(white dot in the middle of the block) is also for the camera.
Electronics Forum | Sun Jun 17 22:51:17 EDT 2018 | smonk
excellent, thank you. I have one coming in the mail now so we will see if this helps with my problem.
Electronics Forum | Tue Jul 12 10:40:27 EDT 2016 | leeg
Brad, have you got any calibration jigs with the machine? This could also be down to laser offset or laser scaling which are both calibrated with different jigs. Where are you based?
Electronics Forum | Tue Nov 17 16:14:59 EST 2020 | aurash
Anyone out there willing to rent me calibration jigs to calibrate the machine offsets for one week? (location is Ireland) Thanks, Aurelian
Electronics Forum | Mon Dec 02 13:53:19 EST 2019 | alexeyzb
Old GC-60D is risk of failure. So Juki is more easy for repairment. For example juki has one calibration jig for head with machine but for GC-60D head you need very expensive KIT (or you need to buy service).
Electronics Forum | Mon Sep 24 10:56:08 EDT 2018 | lozie
I guess you better buy yourself a calibration JIG, as you will need it after each service to the placement heads or lasers. I have spare if I can help you with that, even better would be that the person who sold you the machine should give you the o
Electronics Forum | Fri May 06 07:58:33 EDT 2016 | cyber_wolf
Darby, I'm not completely sure I understand. Juki machines have what is referred to as a multi-head. The offsets between the heads are the same as the spacing between 8mm feeders. So the (6) heads all come down at once and "gang pick" from 6 8mm fee
Electronics Forum | Thu May 05 19:13:33 EDT 2016 | darby
Thanks Sr. If you have zero tolerance for simul pick up in your component files then you will not have simul pick up due to variances in your head offsets. So you are saying that on your Juki you run a tolerance for 0201? All other head positions at
