Electronics Forum | Wed Nov 04 18:30:46 EST 2020 | aurash
Thanks for the info really appreciate. The only problem is that the HDD died on me this morning. JUKI 40027341 (XP)(JE) Rev.02 (this is the part number) - any idea what kind of money is a new/used one? Aurash
Electronics Forum | Thu Jul 08 23:52:24 EDT 2021 | tey422
I would suggest getting KE-2060 or KE-2080 instead. It has better camera and easier programming if you are working with fine-pitch components such as QFPs & Micro BGAs.
Electronics Forum | Fri Mar 23 19:50:57 EDT 2007 | Frank
Possible head combinations to pick from multiple 12, 16, or 24mm feeders. Note: you can not mix feeder sizes for simultaneous picks. KE-2010 and KE-2050 will use 1&3, 2&4, or 1&4 KE-2020 and KE-2060 will use 1,3,R or 2,4,R or 1,4,R I prefer to s
Electronics Forum | Tue Aug 23 15:27:38 EDT 2005 | Frank
I know this post is getting a bit old, but the Juki KE-2060 can do 0201 up to 74mm square (or up to 150mm long connectors) on their standard machine. You only need to purchase the 0201 nozzle and feeder. The machine is factory set to run 0201. And
Electronics Forum | Thu Apr 21 06:11:03 EDT 2011 | fadzril
Dear Lisa, as for current, we're using Sony SI-F130 & G200 machines. for my personal opinion comparing to Pana HT122 & JUKI KE2060, Sony machines are very delicate to handle. the precision is good, especially 0603 parts, but for maintenance-wise, it
Electronics Forum | Mon May 02 10:18:30 EDT 2005 | Frank
Juki KE-2050R (or any of their R-series machines). They have the ability to automatically learn pick positions on paper tape feeders and they can zoom in on pick locations (x2 or x4), so this will help when they release their nozzle for 01005 compon
Electronics Forum | Thu Apr 28 13:23:56 EDT 2005 | Frank
The Juki KE-2060 machine has a very good programming tool for programming odd components. I have thrown quite a few odd connectors and odd BGA at it and the machine placed them all. Custom nozzles can be pricy, so I always try to find a way to use
Electronics Forum | Thu Oct 04 00:03:28 EDT 2018 | gaintstar
flason smt pick and place machine: http://www.flason-smt.com/product/Hanwha-IC-placer-SM321-High-Speed-SMT-Modular-Chip-Mounter.html http://www.flason-smt.com/product/Hanwha-Pick-and-Place-Machine-DECAN-F2-High-Speed-SMT-Modular-Chip-Mounter.html htt
Electronics Forum | Fri May 27 14:37:05 EDT 2005 | Frank
Look into the Juki KE-2060E machine. I have been extremely pleased with this machine. It will hold 80-8mm feeders, place 0201 (0603-metric) up to 74mm square ICs and BGA, 150mm long connectors. Up to 25mm tall components. It can handle up to 30 t
Electronics Forum | Fri May 05 09:52:52 EDT 2006 | Rob
I think perhaps you should revisit the choice and take another look at Universal Advantis, I-Pulse M2 & M4(low cost Assemblion), Samsung SM320 or CP45 Neo, Contact Systems C5, Fuji XP series, Juki KE2060, and Siemens Siplace. There is nothing wrong