Electronics Forum | Mon Oct 28 13:46:38 EDT 2024 | ktm250rider
I have a problem with finding the fiducials on a program. both fids are centered in the search window but I get an error E2114. The only thing I can see from the manual is the last line "if disturbance rays cause problem, shut off disturbance rays"
Electronics Forum | Mon Jan 21 07:01:02 EST 2013 | ericrr
I can not believe this, We get back from Summer holidays turn on the first machine Juki KE750L goes to do a home and before the head moves, Error notice: rear feeder rise error, I go around the back, nothing out of place. but notice the receiver end
Electronics Forum | Tue Nov 08 22:49:41 EST 2022 | jojoled
Hi, I need help with placing 0402 resistors 90% of them are picked correctly, but are not placed(thrown away) giving me error : LASER retry over. Slightly higher varistors in same package have slightly better placing rate, about 50%, but still not su
Electronics Forum | Mon Nov 19 05:16:02 EST 2012 | ericrr
Thank you ENIAC for your comments Here is another problem (JUKI KE-750L) Which applies to 0603 (1608 metric) resistors and only resistors (mind you the board is more heavily populated with resistors) After the panel has gone through the oven, Wh
Electronics Forum | Wed Jan 29 16:11:59 EST 2014 | leeg
Anyone have any idea how to use the HLC software and in particular the Production Planning side whereby you can cluster a number of sides or Jobs? I want to fix side 1 of a program and optimise side 2 around side 1 fixing common parts and then fillin
Electronics Forum | Sun Nov 10 14:17:40 EST 2002 | anonname457
We just went through the same comparison shopping for our company -- and we ended up choosing Juki machines -- as our comparison was between a MY9 with a hydra head and the Juki 2010 & 2020 combo. Both machines have excellent software packages and ar
Electronics Forum | Mon Jan 21 08:44:00 EST 2013 | emeto
Hi, as far as I remember Juki machines have sendor to check if there is a feeder high. So you have several thingd to check here: 1. Check if there is a feeder high 2. check the sensor calibration. I think it is a beam from one side that goes streig
Electronics Forum | Thu Nov 20 06:09:00 EST 2014 | jlawson
Anyone have any idea how to use the HLC software > and in particular the Production Planning side > whereby you can cluster a number of sides or > Jobs? I want to fix side 1 of a program and > optimise side 2 around side 1 fixing common parts >
Electronics Forum | Wed May 10 09:15:12 EDT 2006 | DJuelich
We currently have 5 MyData machines in our facility. Our production lines are the Mydata Synergy package which is two My9 machines connected together and both machines have the Hydra heads in them which is giving us 15k cph and these are rated at 27
Electronics Forum | Mon Jun 05 14:01:48 EDT 2006 | Brian
I have used, Siemens, Juki, Fuji, Universal, and Assembleon. All of them can do the job, depending on the machine mix selected. I personally prefer MPM screenprinters, after using both DEK and MPM. BTU, Vitronics, Heller, and Ellectrovert all make
winsouce.jpg)
