Electronics Forum | Wed Nov 04 18:30:46 EST 2020 | aurash
Thanks for the info really appreciate. The only problem is that the HDD died on me this morning. JUKI 40027341 (XP)(JE) Rev.02 (this is the part number) - any idea what kind of money is a new/used one? Aurash
Electronics Forum | Thu Jul 08 23:52:24 EDT 2021 | tey422
I would suggest getting KE-2060 or KE-2080 instead. It has better camera and easier programming if you are working with fine-pitch components such as QFPs & Micro BGAs.
Electronics Forum | Fri Mar 23 19:50:57 EDT 2007 | Frank
Possible head combinations to pick from multiple 12, 16, or 24mm feeders. Note: you can not mix feeder sizes for simultaneous picks. KE-2010 and KE-2050 will use 1&3, 2&4, or 1&4 KE-2020 and KE-2060 will use 1,3,R or 2,4,R or 1,4,R I prefer to s
Electronics Forum | Fri Aug 28 19:54:05 EDT 2020 | emeto
From what you explain: 1. check all movements X,Y and Z are moving free while machine is off. 2. Resit all driver cards. 3. Check interface cables or boards. Not sure if Juki is using CAN or other interface standard, but random motor errors might be
Electronics Forum | Wed Jun 16 20:27:14 EDT 2021 | bradleycramond
Hi Guys We looking to purchase a second hand system consisting of a Juki KE-2050L and a SMT XXS reflow oven. This will be our first system and used only for our own boards. We hoping to get some opinions and insight from others that have experie
Electronics Forum | Thu Jul 01 18:05:16 EDT 2021 | cyber_wolf
2050's are old and no longer supported. If a major component fails you could be in trouble. Control boards etc....
Electronics Forum | Thu Jun 05 19:19:13 EDT 2014 | FD
When you assign the feeder location, there is a default XY value that gets assigned to that location. When you teach the actual XY pick position you move away from that default position, and if the actual pick position is too far away from the defau
Electronics Forum | Sat Mar 25 16:27:51 EST 2006 | Frank
I would rather keep my Juki KE-2060. It runs faster, do larger boards, and can place a wider range of components when compared to the Opal. Also, I have trolleys on front and rear, without losing any feeder locations. Why can't you put trolleys on
Electronics Forum | Tue Aug 23 15:27:38 EDT 2005 | Frank
I know this post is getting a bit old, but the Juki KE-2060 can do 0201 up to 74mm square (or up to 150mm long connectors) on their standard machine. You only need to purchase the 0201 nozzle and feeder. The machine is factory set to run 0201. And
Electronics Forum | Mon May 02 10:18:30 EDT 2005 | Frank
Juki KE-2050R (or any of their R-series machines). They have the ability to automatically learn pick positions on paper tape feeders and they can zoom in on pick locations (x2 or x4), so this will help when they release their nozzle for 01005 compon
