Electronics Forum | Mon Nov 14 03:48:18 EST 2022 | frankchan
Maybe also check the air pressure, the lack of air pressure could also sometimes make the head lose grip on the nozzles
Electronics Forum | Tue Nov 15 00:33:42 EST 2022 | frankchan
That is right, air pressure would be a higher level of malfunction and reported on the main screen, maybe also try maintenance of the head, cleaned up and oiled them, anyway I'm speaking of experience based on the old days when I using the Fuji serie
Electronics Forum | Fri Oct 13 19:01:46 EDT 2023 | crystalw4280
I have an old Juki 2060 The electors were replaced on some heads that were disabled. Now we are showing some of the same errors with those heads. Does anyone have any suggestions for possible cause that would make this happen again. Another warning
Electronics Forum | Tue Oct 24 19:09:12 EDT 2023 | sarason
Possibly blocked air lines did you check air pressure? Also drivers on the relevant boards. or simply damage in the flexible wiring harness( a nightmare) sarason
Electronics Forum | Wed Mar 07 19:05:49 EST 2007 | JD
Anymore comments on the Assembleon. I am in the midst of this same decision now. Throw in the Juki 2060 and we have a ballgame...
Electronics Forum | Fri Mar 23 19:50:57 EDT 2007 | Frank
Possible head combinations to pick from multiple 12, 16, or 24mm feeders. Note: you can not mix feeder sizes for simultaneous picks. KE-2010 and KE-2050 will use 1&3, 2&4, or 1&4 KE-2020 and KE-2060 will use 1,3,R or 2,4,R or 1,4,R I prefer to s
Electronics Forum | Mon Aug 11 11:00:43 EDT 2003 | ravi
DEAR FRIEND, why can"t you go for the juki ke 2050/2060 m/cs. i am working woth those m/cs, excellent performance. pls thinh once before taking finel decision. thanks for sharing with you, ravi
Electronics Forum | Wed Nov 04 18:30:46 EST 2020 | aurash
Thanks for the info really appreciate. The only problem is that the HDD died on me this morning. JUKI 40027341 (XP)(JE) Rev.02 (this is the part number) - any idea what kind of money is a new/used one? Aurash
Electronics Forum | Tue Nov 17 16:14:59 EST 2020 | aurash
Anyone out there willing to rent me calibration jigs to calibrate the machine offsets for one week? (location is Ireland) Thanks, Aurelian
Electronics Forum | Thu Jul 08 23:52:24 EDT 2021 | tey422
I would suggest getting KE-2060 or KE-2080 instead. It has better camera and easier programming if you are working with fine-pitch components such as QFPs & Micro BGAs.
.gif)
.gif)
