Electronics Forum | Wed Jan 27 22:39:46 EST 2010 | wmeliane
Thanks for the recommendations. We have settled on the new Juki CX-1. Juki states that the machine is a hybrid between a MCM placer and an SMT placer. This machine, if it is capable to do what Juki says it can do, is exactly the machine we need. Ma
Electronics Forum | Thu Aug 25 10:32:03 EDT 2005 | davef
IPC-2221A, Generic Standard on Printed Board Design, the base document that covers all generic requirements for printed board design, regardless of materials. From there, the designer can choose the appropriate sectional standard for a specific techn
Electronics Forum | Sat Aug 26 03:12:27 EDT 2017 | ausplex
Hi, We have a Juki KE-730, and was looking to buy a Zevatech KE-730 has a backup and for spares. We thought these machines would be identical, however when we looked at the circuit cards we noticed the image processing cards were quite different. I
Electronics Forum | Mon Sep 03 10:57:28 EDT 2018 | robl
Hi Oriol, Sounds more like a power supply/low voltage problem if all the driver cards are failing. Can you check if the PSU supplying them is stable? Rob.
Electronics Forum | Tue Mar 16 03:20:39 EDT 2021 | cosimaliu
please try to Replace the image card of IP-X5 and confirm whether the problem is solved. cosima@qy-smt.com
Electronics Forum | Sat Aug 26 03:18:15 EDT 2017 | ausplex
Mid-production our KE-730 halted and gave us a “SUB CPU1:BUS ERROR” message on the video monitor. Then we got on the same monitor a detailed error message with address and byte information (unfortunately I didn’t copy the details). Now when we boot
Electronics Forum | Mon Aug 18 16:54:46 EDT 2008 | jlawson
Great to see running. The Vision Monitor Video comes from the Vision Processor Card, including overlay info, grids etc depending on mode you are in, like teaching etc Why is is on still I can not say, could be software version, there was several ve
Electronics Forum | Tue Oct 18 14:38:47 EDT 2016 | muzzy
Just for a future reference: we managed to fix our machine. The problem was related to hard disk drive, we had to replace HDD, expansion card for HDD and motherboard. They were all fried, probably due to some kind of voltage spike. The LEDs itself ha
Electronics Forum | Mon Apr 15 09:27:10 EDT 2019 | robl
Opal Xii if it has the 8 head conversion. Much faster in real life than a 2060, and parts such as cards more readily available. Had both machines and much prefer the Yamaha built Assembleon badged machines. Both will do 01005. If you do go Juki th
Electronics Forum | Fri Aug 28 19:54:05 EDT 2020 | emeto
From what you explain: 1. check all movements X,Y and Z are moving free while machine is off. 2. Resit all driver cards. 3. Check interface cables or boards. Not sure if Juki is using CAN or other interface standard, but random motor errors might be
