Electronics Forum | Wed May 15 05:31:53 EDT 2013 | jlawson
Also make sure nozzle retraction is ok, if nozzle shafts stick at different heights can effect laser centering stability.
Electronics Forum | Fri Sep 21 16:28:10 EDT 2018 | tey422
Have you run some simple placement test yet? Use double-sided tape on the solder sample, run different size of components to see if all or certain size part are placed off; best with different rotation angle too. Chances are nozzle(s) or even shaft
Electronics Forum | Fri Apr 06 02:17:15 EDT 2018 | rob
@ Sr.Tech, Most of our Chinese spares are Juki & Yamaha original & still bagged, just much cheaper. They wouldn't sell machines in China if all the spares and consumables were at European mark ups. Nozzle wise the Juki 750 & 760 copies are not 100%
Electronics Forum | Thu Apr 21 06:11:03 EDT 2011 | fadzril
Dear Lisa, as for current, we're using Sony SI-F130 & G200 machines. for my personal opinion comparing to Pana HT122 & JUKI KE2060, Sony machines are very delicate to handle. the precision is good, especially 0603 parts, but for maintenance-wise, it
Electronics Forum | Thu Aug 07 17:25:11 EDT 2008 | jlawson
With Laser centering nozzle condition in terms of slider shafts have to return to same position every time. Please check condition of nozzle and make sure slider extends to full position. If slider sticks it can generate errors as the component appea
Electronics Forum | Tue Jun 06 00:53:55 EDT 2023 | frankchan
Hi Rob, my previous offer to you assumed you would stick with Yamaha, if others suit you then we could also supply. If Why no one recommends Samsung/Hanwha you ask, from the seller's point of view, Samsung's market is majorly in China, with about 2~3
Electronics Forum | Thu Oct 04 00:05:25 EDT 2018 | gaintstar
Flason SMT chip mounter Reflow Ovens: http://www.flason-smt.com/product/PCB-assembly-line-equipment-SMT-spare-parts-Dek-Motor-188962.html http://www.flason-smt.com/product/PCB-Conveyor-for-LED-Production-Line-SMT-Assembly-Line.html http://www.flason-
| 1 |
