Electronics Forum | Wed Jul 04 09:54:07 EDT 2007 | timstevenson
I have posted on the advert site the my need for this camera. All the responses are from off shore and I am hesitant to deal with someone where their is no chance for recourse . Does anyone know a North American source for this camera ? Juki sells it
Electronics Forum | Mon Jul 11 21:46:19 EDT 2011 | garym4569
Anyone know how to enable pick tracking for the Juki 730 and 760. Our Juki 750's and 2060 allow me to press the camera button during a production stop to manually check pick position with the camera if the machine stops for no component, laser recon
Electronics Forum | Fri Sep 21 16:04:48 EDT 2018 | gpascolla
We have an old juki 740 which was purchased off of eBay at this time I am having placement problems with accuracy. I have taught to the board with the camera numerous times but I still have placement problems where the chip will be off the pad by alm
Electronics Forum | Fri Mar 24 11:28:10 EDT 2023 | cyber_wolf
We replaced at least 4 Hydra heads, 3 midas heads, vacuum pumps, line scan cameras under warranty back in the day. I have worked with Juki 2060 and 3010 series. Whomever is telling you they are bad machines doesn't know.
Electronics Forum | Sun Dec 21 23:30:09 EST 2014 | sarason
Since the Laser alignment bit is attached to the head and you don't have to move the part to a camera location, before placing the component on the board it is about the fastest method there is of getting accurate component alignment. With more moder
Electronics Forum | Mon Feb 16 01:26:30 EST 2004 | Frank
The 575 was based on the 570 machine. The 570 was Juki's first laser centered machine. It can do 0402 and ICs with a pitch of 0.65mm or greater. The 575, was a re-vamped 570 that Zevatech came up with. Juki played no part in the 575. Zevatech ad
Electronics Forum | Sat Apr 22 19:40:32 EDT 2023 | smtusa
"I also believe some of the on-machine tools are unmatched in the industry...manually placing parts, reviewing the boards with the downward looking camera, learning new packages, etc." What do you mean by manually placing parts and reviewing boards
Electronics Forum | Tue May 14 14:15:41 EDT 2013 | leeg
Thanks Evtimov. We have a 750 with no camera so unfortunately have to use laser. Also is there ever a need to manually alter the laser height for a component ?
Electronics Forum | Sun Jun 17 23:04:16 EDT 2018 | jandon
Nice! Place it in jig holder larger holes upward and start calibration. This calibration block is only for the laser heads. Calibration block E5190729000(white dot in the middle of the block) is also for the camera.
Electronics Forum | Thu Jul 08 23:52:24 EDT 2021 | tey422
I would suggest getting KE-2060 or KE-2080 instead. It has better camera and easier programming if you are working with fine-pitch components such as QFPs & Micro BGAs.
