Electronics Forum | Wed Sep 26 11:54:02 EDT 2001 | Stefan
John, you mention yourself that this problem is component related. Is the 1206 presented out of a plastic tape?. The tape could be more slippery than the paper tape and the cover tape may pull the tape out of position. I am not familiar with the Juk
Electronics Forum | Thu May 18 17:34:06 EDT 2006 | Frank
The Juki tape feeders are mechanically actuated. There is a knock pin on the bottom of the feeder bank that will push up to advance the feeder.
Electronics Forum | Fri Dec 15 20:12:13 EST 2006 | Frank
The strip tape tray feeder is not practical if you have a lot of different strips. What about using splicing? Take some empty tape and splice it on to the front of your strips?
Electronics Forum | Fri Dec 15 14:29:13 EST 2006 | MFG CAVEMAN
We are a medium sized CM with a HUGE product mix. Lot's of prototyping. As a result, we see a lot of cut tape on consignment kits and turnkey jobs where there's no confidence in repeat business. Purchasing is under instructions to buy full reals w
Electronics Forum | Fri Mar 17 14:41:28 EDT 2023 | emeto
Your request looks like a low volume machine will do it. Juki and Mycronic are both reputable manufacturers that make good quality machines. I did work with both and can say mainly good things about these machines. Now some interesting things to cons
Electronics Forum | Wed May 08 10:05:42 EDT 2002 | Claude_Couture
Maybe the problem is not the cutter, but the arm that advance the tape in the adjacent feeder gets actuated at the same time as the active feeder. line-up a feeder in pickup position visually, then turn the crank until the roller or feeder advance me
Electronics Forum | Mon Mar 21 15:06:53 EDT 2011 | babe7362000
Has anyone had experience with Digi-reels from Digikey? What are your likes and Dislikes? Do they work well with Juki Feeders? We have tried the ones that came in with red tape and they seem to get stuck in the feeders. Anyone else have this issu
Electronics Forum | Mon Aug 01 08:54:39 EDT 2022 | spoiltforchoice
You should get good service support and reliability from all of them, provided your local distribution agent is a good one. In the UK for instance I would trust all 3 on that front but I would expect very different support pricing structures. Any ma
Electronics Forum | Thu Jul 15 13:41:23 EDT 2004 | Claude_Couture
We use paper tape in green emboss feeder without problems. But you can't use emboss tape in white paper feeder because the bottom of the tape needs a channel so the tape is supported on two side. Also, we remove all push pins. they are useless. We ne
Electronics Forum | Wed May 08 09:49:17 EDT 2002 | Hussman69
Hello, We are experiencing a little problem of cutting feeder tape. When ever we place two or more 24 mm feeders together, the cutter on the machine will partialy cut the adjoining tape, or pull it out of sequence. The machine is a Panasonic MSR,