Electronics Forum | Mon Feb 11 11:28:43 EST 2013 | marcelorotofrance
yes, Bob, I agree about that. But I can't afford them by now. But the problem is that I had to reject almost the 50% of the feeders that came with the machine, because are useless even for 1206. I also work with a very old but faithfull Juki, with it
Electronics Forum | Fri Sep 13 08:59:17 EDT 2002 | bmulcahy
Hi , Using the Agilis feeders 3/4 months now. We are low volume so they haven't worked hard , but we have had no real problems. They seem to work well with both paper and plastic tapes.As for components we use them on 0603, 0805 ,SOT ,mini-melf & t
Electronics Forum | Wed Apr 30 09:22:26 EDT 2003 | gregp
Sounds like PSA cover tape. Contact Siemens about this. There may be an adjustment or modification to the feeder to stop it from delaminating the tape. This is generally a problem in feeders that have continuos tension on the take up mechanism (su
Electronics Forum | Mon Mar 06 10:54:22 EST 2006 | fredericksr
We have also had some of the same problems, but at the risk of sounding redundant, we have had success in using both the 8mm and 16mm tape clips to secure the tape. We have also been very pleased with the adjustable 16mm feeder doing a job the regul
Electronics Forum | Thu Oct 27 20:30:54 EDT 2011 | tech1
Yeah that is a drawback to those feeders. The plastic part that is mentioned in one of the responses is okay but you have to be real careful when pulling the tape out before you can put that part on. Mydata always says to leave the reel with the feed
Electronics Forum | Tue Jun 18 23:29:02 EDT 2019 | SMTA-David
Hi, I have an older Samsung pick and place (CP-40LV model). During last few runs I have experienced several feeders with the clear plastic tape cover not peeling back to expose the next part. I manually pull back the tape and it runs for a while and
Electronics Forum | Thu Oct 27 15:49:06 EDT 2011 | davef
MachineHead: I'm not so clear on the definition of the problem. Is it: * Some components are picked, but others are not picked and remain in the pocket of the tape * All components are picked, some are placed, but others are not placed * Everything p
Electronics Forum | Thu Dec 08 15:29:06 EST 2005 | bpoech
Has anyone adopted Dual Lane Tape feeders in their production of SMT circuit board assemblies? Universal Instruments caries one if people are not familiar. I am looking into a smooth adoption of this into production and have been looking to gather a
Electronics Forum | Tue Jan 24 21:15:07 EST 2017 | david_chiu
I have met the same issue before. 1st possible root cause: The dimensions of reel's each chip inserting hole are a little bigger. You need to see if the turn over issue are all happened in the same vendor's reel material. 2nd possible root cause: The
Electronics Forum | Wed Jul 07 10:17:33 EDT 2010 | flipit
We have this problem only with one manufacturer of LEDs. Avago LEDs give us the problems where SunLED and KingBright do not. We put a magnet under the embossed cover tape. The magnet is mounted to the feeder. Holds the part in the tape pocket. L
