Electronics Forum | Tue Feb 05 18:26:34 EST 2008 | janz
Hello, We have FCM base 2 machine (Philips-Assembelon). I am trying to find out whether it is possible to install instead vacuum pump (make noise and power consumption) venturi system. Does anyone try to do this.? What was the result.? What vent
Electronics Forum | Mon Dec 18 14:11:02 EST 2023 | erikfriesen
Has anyone ever replaced the venturi vaccum pump on the CP45 or other series machine? Or used a centralized vaccum system? It works fine, but air consumption seems excessive. This is what is in there, it probably uses 10cfm at least. https://www.p
Electronics Forum | Mon Jan 29 13:06:48 EST 2024 | erikfriesen
A follow up, using an external vacuum pump works fine, and reduces load on the air compresssor, probably using 1/3 of the air.
Electronics Forum | Tue Oct 22 20:32:16 EDT 2024 | jamesatqkits
I also use a small vacuum pump, this allows me to run a small compressor to supply air to the machine, around 7.5cfm. Someone suggested it to me years ago, the venturi system in the machine uses a lot of air and is noisy. The pump is a yellow jacket
Electronics Forum | Wed Mar 08 03:44:46 EST 2006 | lov3ly_9irl
Hi, Can anybody know a company that sell vacuum filter for Juki and Yamaha machines? Tks. Lauren
Electronics Forum | Fri Mar 10 03:30:44 EST 2006 | lov3ly_9irl
Thanks
Electronics Forum | Wed Mar 08 07:51:27 EST 2006 | sagan
Any SMC resseler may have the Venturi filter for the Juki... as for the Yamaha, i don't honestly know.
Electronics Forum | Wed Mar 08 16:52:07 EST 2006 | darby
Which model Yamhah are you talking about and what is the make and model # of the manifold block for the micro ejectors? If it has the Koganei ME05M series then your local rep can supply the filters. It is a good idea to get spare O-rings for the filt
Electronics Forum | Fri May 14 16:49:17 EDT 2021 | winston_one
Agree with WiIIR and also can recommend to play with vaccum pump RPM . Slower vacuum increasing have help me to resolve one problem caused by the vacuum (it was solder splash from BGA balls, but the reason can be similar to your case). Also check i
Electronics Forum | Fri Oct 13 19:01:46 EDT 2023 | crystalw4280
I have an old Juki 2060 The electors were replaced on some heads that were disabled. Now we are showing some of the same errors with those heads. Does anyone have any suggestions for possible cause that would make this happen again. Another warning
