Electronics Forum | Tue Oct 20 23:14:01 EDT 2015 | kiwiguy12345
Hi, I have struck a problem with the X axis on my Juki 740. As soon as I "home" the machine the X driver displays the code "961" Does anyone have any ideas as to a solution for this problem? Thanks!
Electronics Forum | Wed Nov 25 08:23:47 EST 2015 | tercel
Does anyone know how to use the Juki 740 / 750 / 760 in Bypass mode, if the Machine has no parts to place? We use 3 Jukis and for some PCBs it is not neccessary to use all 3 of them. so it would be usefull to use the machine in bypass mode. Is it pos
Electronics Forum | Fri Sep 21 16:04:48 EDT 2018 | gpascolla
We have an old juki 740 which was purchased off of eBay at this time I am having placement problems with accuracy. I have taught to the board with the camera numerous times but I still have placement problems where the chip will be off the pad by alm
Electronics Forum | Sun Dec 02 16:08:19 EST 2012 | sarason
Did you end up buying either of these machines ? sarason
Electronics Forum | Fri Sep 21 16:31:45 EDT 2018 | gpascolla
Ran numerous tape boards with all the same results
Electronics Forum | Tue May 05 15:12:29 EDT 2020 | electronicsprecis1
I have a Juki 740 that was working great until one day a motor cable broke and after this messege the emergency stop button has been pressed..." error popped up when I turned the machine on. I know the emergency stop works all the way. Does anyone ha
Electronics Forum | Sat Jun 11 03:27:30 EDT 2016 | muzzy
Hello. We have a problem with our Juki 740 machine. It does not start at all, both monitors are blank. The only error we can see is "FAIL" LED on CPU board and red "LD2" LED on "AC SERVO BOARD". Does anyone know what the "LD2" LED means? Or, even be
Electronics Forum | Wed Mar 23 17:35:36 EDT 2011 | smtequip
No - the factory 740 spec says that it will go down to an 0402. I am a former Juki agent and sold many of these machines new. I now sell them used. If I can assist you let me know: smtequip@gmail.com. Thanks, Scott
Electronics Forum | Wed Mar 23 18:02:31 EDT 2011 | fredc
Hello Scott, We have sold modified 101 nozzles. They had a .25mm hole instead of standard. The customer ordered these for placing 0201s. Is it possible they were used on the 740 machine? Or maybe the 760? FredC
.jpg)
