Electronics Forum | Thu Jun 13 10:55:07 EDT 2019 | sumote
Filters get clogged. With wash-away spacers you will have to do more PMs on the machine. That said, they do work nicely. Just make sure they play nice with your wash chemistry.
Electronics Forum | Tue May 15 11:35:53 EDT 2001 | Stefan Witte
you can buy a visco meter for $ 143.44 from McMaster-Carr http://www.mcmaster.com but to my expirience the viscosity was very consistent from batch to batch. The glue application itself has so many variables, temperature, pressure, needle diameter, s
Electronics Forum | Fri Aug 18 07:49:34 EDT 2006 | markb
Thank for the feedback everyone. The LED is designed to be soldered 2mm above the board, so that is their rational for allowing that much flash. And a spacer is not going to work because of the height limit of mating parts (I didn't design the boar
Electronics Forum | Tue Aug 18 21:42:48 EDT 2015 | comatose
Why not just pick up something like an old Camalot 1414 and use that? Then all the work other than rigging up a valve is already done. 1414s go for a couple or five grand in workable condition, especially without a pump.
Electronics Forum | Thu Feb 15 14:51:39 EST 2007 | nitro
We have five 1997 DEK 265LTs, and we have never had to have the stencil house blacken any fiducials. The fiducials are etched about halfway through the stencil. You can adjust the lighting in each individual program, not just a global lighting change
Electronics Forum | Fri Mar 16 18:32:06 EST 2001 | djarvis
Anyone using "Hitano" 0805 capacitors please check their values before running. I just got stung by parts labeled as 100nf when they were in fact 10nf. We found five out of fifteen reels in the smd room incorrect, who knows what stores will find. P/N
Electronics Forum | Thu Apr 28 01:30:07 EDT 2005 | Marv
The Tray wagon on a Mydata can be any table width you desire, a one bay holds two trays, a two bay holds five, and a three bay holds seven. The tray wagon can be removed in about a minute flat. the TEX actually only requires two slot positions to h
Electronics Forum | Wed Apr 02 05:31:45 EDT 2014 | jdumont
We have four or five of these guys scattered around our 40,000sqft plant spraying DI water. They have a not so accurate built in humidistat but its good enough and they aren't that expensive for upfront cost. Just lube the packing washers in the gun
Electronics Forum | Tue Nov 10 00:18:52 EST 2015 | ttheis
How is a board conveyor typically configured to unload into a conveyor oven if there is no downline machine to five a ready to receive signal? Do you just use a plc to activate the machine ready signal at a timed interval? Would you perhaps do the sa
Electronics Forum | Mon Feb 08 21:28:16 EST 1999 | Dave F
| | What did you guys do to our forum? I do not want the 5 five I want a listing of all in the last 5 days min. More and more it seems that this site getting a little less user friendly! | | | | Thanks for the comments. | | Our intention is not to